Seco WNMG080408-MF2 TP25 Turning Insert
The price shown is for the pack.
Available
Genuine Seco 80° trigon turning insert, Grade TP25 with MF2 chipbreaker.
Key Specifications
| Grade | TP25 |
|---|---|
| Insert Shape | 80° trigon (ISO shape code W) |
| Chipbreaker | MF2 |
| Insert Details | W shape code. G insert type, with hole and chip breaker on both faces. |
About Grade TP25
The universal grade for highly versatile performance over a wide range of applications in steels, stainless steels, and cast irons. Trustworthy alternative at limited cutting speeds or high surface finishes requirements. Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).
About the MF2 Chipbreaker
First choice for finishing with negative inserts. Suitable for chip control at depths of cutting down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining. Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.
About Seco Turning Inserts
Anything is possible when it comes to our broad selection of general turning grades and chipbreakers. Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind: to boost the productivity and tool life in your turning applications. Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Turning Insert WNMG Insert Style - MF2 Grade TP25: WNMG080408-MF2 TP25
SKU: A0158507 | Model: 03276722
Designation WNMG080408-MF2 TP25. Turning Insert WNMG Insert Style - MF2 Grade TP25
W shape code.
G insert type, with hole and chip breaker on both faces.
TP25 Insert Grade
The universal grade for highly versatile performance over a wide range of applications in steels, stainless steels, and cast irons.
Trustworthy alternative at limited cutting speeds or high surface finishes requirements.
Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).
MF2 Chipbreaker Programme
First choice for finishing with negative inserts.
Suitable for chip control at depths of cutting down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev.
Good capacity for medium rough machining.
Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.
About Seco Turning Insert
Anything is possible when it comes to our broad selection of general turning grades and chip breakers.
Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.
to boost the productivity and tool life in your turning applications.
Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.
