Skip to content

Turning Insert WNMG Insert Style - MF2 Grade TP3501: WNMG060408-MF2 TP3501

SKU: A0118162 | Model: 03094163

Seco Turning Insert W Shape Code 4.76 x 0.8 x 9.53mm G Insert Type - MF2 Grade TP3501 ± 0.13/± 0.05mm Tolerance WNMG060408-MF2,TP3501 10pcs

Turning Insert WNMG Insert Style - MF2 Grade TP3501

W shape code.

G insert type, with hole and chip breaker on both faces.

TP3501 insert grade.

TP3501 Insert Grade

Duratomic® grade.

Enhanced edge toughness still with the characteristic high wear resistance intended for versatile performance in turning applications in steels as well as stainless steel especially including interrupted cuts.

Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).

MF2 Chipbreaker Programme

First choice for finishing with negative inserts.

Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev.

Good capacity for medium rough machining.

Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.

About Seco Turning Insert

Anything is possible when it comes to our broad selection of general turning grades and chip breakers.

Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.

to boost the productivity and tool life in your turning applications.

Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.

Quote Cart