Mitutoyo Vernier Depth Gauge 0-200mm x 0.05mm (527-202)

The Mitutoyo Series 527 is a standard vernier depth gauge. It measures depth from 0 to 200mm with a base for sitting on the work. Fitters, toolroom staff, inspectors and apprentices use it to check hole, slot and step depth. You read the main scale first and then use the vernier scale for the fraction.

The minimum reading on the 527-202 is 0.05mm, and the maximum permissible error is ±0.05mm. Minimum reading is the smallest step you can read. Maximum permissible error is the most a reading can be out. If you want to read to 0.02mm, look at the 527-102, which has fine adjustment.

Where this product is used

• Measuring hole and slot depth in workshops and toolrooms
• Checking step height on machined parts
• Training apprentices to read a vernier scale

Features

• Range of 0 to 200mm
• Minimum reading of 0.05mm
• Maximum permissible error of ±0.05mm
• Base of 100mm x 6.5mm for sitting square on the work
• Overall length of 310mm
• Optional longer extension bases are available

Key specifications

Supplied with

• One vernier depth gauge with base