0.6 mm x 305 m 7 x 7 Wire Rope, 316 Stainless Steel - WRO7X7A4M06

The Wire Rope 7 x 7 Construction, 316 Stainless Steel is available in 21 sizes (0.6 mm to 10 mm) and is stainless wire rope made from seven strands of seven wires. It is flexible enough for general use and less flexible than 7 x 19.

Made from 316 (A4) stainless steel, the grade normally specified for chloride-exposed work such as coastal installations, swimming pools, marine fittings and food-processing plant.

This listing has 21 variants covering sizes 0.6 mm to 10 mm and coil lengths of 50, 100, 305 and 1000 m.

In wet conditions, keep stainless steel apart from aluminium and galvanised steel with a washer or sleeve, to reduce the risk of galvanic corrosion.

Where this product is used

• Balustrade and fencing wire
• Architectural work near the coast
• General rigging, guy lines and cable ties
• Marine and coastal cable runs
• Chemical and washdown areas

Features

• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Choice of 21 sizes, 0.6 mm to 10 mm
• General-purpose flexibility
• Seven strands of seven wires

Key specifications

Selecting the right option

Choose the diameter and coil length shown on the variant. Match fittings to the rope diameter.

Important

Do not use this product to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.