AAP EPDM Rubber Bellow, Table D, 10 in (250 mm) | RB250D

This AAP EPDM rubber bellow is drilled to Table D (manufacturer-stated). It is supplied in one size, 10 in (250 mm).

A rubber bellow is a flexible joint moulded in a spherical shape from heat-resisting synthetic elastomer, with metal floating flanges. Installed in a piping system, it absorbs movement in three directions: axial (elongation and compression along the centre line), lateral (offset from the centre line) and angular (bending about the centre line).

The body is EPDM, rated -30 to +120 °C, with a nylon cord fabric lining and a hard steel wire frame. AAP lists EPDM as generally resistant to animal and vegetable oils, ozone, and strong and oxidising chemicals, and generally affected or attacked by mineral oils and solvents, and aromatic hydrocarbons. Applications listed by AAP: air, compressed air, water, sea water, hot water and weak acid.

Where this product is used

• Absorbing axial, lateral and angular pipe movement
• Flexible connections at pumps and other equipment
• Compressed air, water, sea water and hot water lines
• Weak acid duties, subject to the chemical resistance listed

Features

• One size, 10 in (250 mm)
• EPDM body, -30 to +120 °C
• Flange drilling: AS2129 Table D (manufacturer-stated)
• Absorbs axial, lateral and angular movement, with 15° angular deflection on all sizes
• Bursting pressure 6,000 kPa and vacuum rating 86.7 kPa, per the manufacturer
• Moulded spherical body with nylon cord lining, steel wire frame and metal floating flanges
• EPDM resists animal and vegetable oils, ozone and strong oxidising chemicals

Key specifications

Selecting the right option

Match the flange drilling to the flanges on your pipework: this bellow is drilled to Table D (AS2129, manufacturer-stated). Check the movement you need to absorb against the table, because AAP lists each movement separately, and contact AIMS if the joint will see more than one movement at once. EPDM is not suited to mineral oils, solvents or aromatic hydrocarbons, so choose an NBR bellow for those duties. If you are not sure what suits, contact AIMS with your pipe size, flange standard, fluid and temperature.

Related products

See also AAP EPDM Rubber Bellow, Table E, AAP NBR Rubber Bellow, Table E, AAP EPDM Rubber Bellow, Table E x BS4504 PN16, AAP NBR Rubber Bellow, ANSI B16.5 Class 150 and AAP Slip-On Plate Flange, AS2129 Table D.