AAP Class 800 Fire Safe Ball Valve, 3/4"

This AAP 3-piece Class 800 fire safe ball valve has a stainless steel (ASTM A351 CF8M) body and end cap, with a CF8M / 316 stainless steel ball and stem. It is supplied in 8 sizes from 1/4" (8mm) to 2" (50mm).

A ball valve turns a ball with a hole through it between sealing seats. When the lever or handle is in line with the pipe the hole lines up with the flow and the valve is open, and a quarter turn closes it. The handle sits in line with the port, so it shows the valve position. The seat, gasket and thrust washer are PTFE, the stem packing is graphite and the valve has an anti-static device. The 1/4" to 1/2" sizes are not direct mounting for an actuator.

Where this product is used

• Water, oil and gas isolation where a fire safe valve is specified
• Process, utility and plant pipework
• Skid-mounted equipment and manifolds
• Actuated shut-off using the ISO 5211 mounting pad

Features

• 8 sizes from 1/4" (8mm) to 2" (50mm)
• 3-piece, stainless steel body
• Fire safe design with graphite stem packing and an anti-static device
• Cold working pressure 2,000 psi (13,789 kPa), maximum 200°C
• NPT thread to ANSI B1.20.1, ISO 5211 mounting pad
• Tested to API 598

Key specifications

Choosing the right option

Choose the size to match your NPT pipe thread, and check the ISO 5211 pad against your actuator if you are fitting one.

Related AAP products: AAP 3-Piece Class 800 Fire Safe Ball Valve, Carbon Steel, AAP Flanged Fire Safe Ball Valve, Stainless Steel 316, ANSI 150, AAP Flanged Fire Safe Ball Valve, Carbon Steel, ANSI 300, AAP Stainless Steel Ball Valve, 3-Piece, Full Bore.