AAP Stainless Steel Swing Check Valve, 3/4"

This AAP stainless steel swing check valve has a CF8M stainless steel body, bonnet and disc, a 316 stainless steel hanger pin and plug, a PTFE plug gasket and female threaded ends. It is supplied in 8 sizes from 1/2" (15mm) to 3" (80mm).

A swing check valve lets liquid flow through in a nearly straight line, like a gate valve, and stops it flowing back. A disc hangs on a hinge, so forward flow swings it open and reverse flow swings it shut against the seat. This type is commonly used on pipelines moving liquid by gravity or by pump. The maximum working temperature is 200°C and the cold working pressure is 1,400 kPa (14 bar), with a thread to AS 1722.1. AAP calls it a 316 BSP check valve in its table heading.

Where this product is used

• Corrosive liquids and environments
• Chemical and process lines, once material compatibility is checked
• Water, oil and gas non-return
• Washdown and marine pipework where brass would not last

Features

• 8 sizes from 1/2" (15mm) to 3" (80mm)
• CF8M stainless steel body, bonnet and disc
• 316 stainless steel hanger pin and plug, PTFE plug gasket
• Thread to AS 1722.1
• Cold working pressure 1,400 kPa (14 bar), maximum 200°C
• Suits water, oil, gas, chemicals and corrosive liquids

Key specifications

Choosing the right option

Choose the size to match your pipe thread, and check that CF8M and PTFE suit your fluid and temperature.

Related AAP products: AAP Stainless Steel 3 Piece Spring Check Valve, Screwed, AAP Brass Swing Check Valve, Screwed, AAP Brass Check Valve, Y-Type, Spring Loaded, AAP Brass Check Valve, E-Type, Spring Loaded.