Austsaw MBR1352026 135mm x 26T RaiderX Metal Blade

The Austsaw RaiderX Metal Blade is a cermet tipped circular saw blade for general purpose metal cutting, including angle, C-channel, stud, pipe, plate, tube and rebar (manufacturer-stated). This page lists six sizes from 135mm to 355mm diameter: four for cordless and corded saws and two, the 305mm and 355mm blades, for low speed saws.

Austsaw lists cermet tips for clean, cool cutting, laser cut slits for noise reduction, a super thin kerf design and advanced tooth geometry for balance and stability in a straight running cut, and states 3x the life of its competitors (manufacturer-stated). All sizes have a 0° hook angle (listed in the catalogue as Rake).

The maximum cut thickness rises with diameter: 4.0mm on the 135mm and 150mm blades, 6.0mm on the 165mm and 185mm blades and 10.0mm on the 305mm and 355mm blades. The 305mm and 355mm blades run at 1,700 RPM and 1,500 RPM maximum and are listed as resharpenable; the catalogue refers to its cutting procedure notes for them: clamp the material tightly and, where possible, cut corner to corner so that as few teeth as possible are in the cut.

Where this product is used

• Cutting steel angle and C-channel
• Cutting steel pipe and tube
• Cutting steel plate and flat bar
• Cutting steel studs
• Cutting reinforcing bar

Features

• Cermet tips for clean, cool cutting in metal (manufacturer-stated)
• Laser cut slits for noise reduction (manufacturer-stated)
• Super thin kerf design (manufacturer-stated)
• Advanced tooth geometry for a straight running cut (manufacturer-stated)
• 0° hook angle with an ATB 3° or 5° tooth grind (manufacturer-stated)
• Austsaw states 3x the life of its competitors (manufacturer-stated)

Common specifications

Key specifications

Figures are from the Austsaw catalogue Edition 21 and the Alpha Tools product feed (manufacturer-stated). Bush is shown where the catalogue lists one.

Selecting the right option

Choose the diameter and bore your saw takes, then check the maximum cut thickness against your material (4.0mm, 6.0mm or 10.0mm by size). The 305mm and 355mm blades are for low speed saws only. For steel thicker than 6.0mm on a 185mm saw see Austsaw Extreme Heavy Metal Blade, for sheet metal to 1.2mm see Austsaw RaiderX Sheet Metal Blade, and for stainless see Austsaw Extreme Stainless Steel Blade.

Related products

See also the Austsaw Extreme Heavy Metal Blade, the Austsaw RaiderX Sheet Metal Blade range, the Austsaw Extreme Stainless Steel Blade range and Austsaw saw blade bushes.