Beaver horizontal plate clamps, 1.5t / 50mm

Beaver CQ horizontal plate clamps are heavy duty, all steel clamps with a baked enamel finish, sold in pairs for lifting non-flexing steel plates in a flat plane. The working load limit (WLL) is given per pair.

The clamps comply with AS 4991. The clamp is to be used only on steel with a hardness of 37 HRC (345 Brinell). The clamps are proof load tested at manufacture. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

Where this product is used

• Lifting steel plate
• Handling plate in fabrication and workshop areas

Features

• Heavy duty, all steel construction
• Baked enamel finish
• Sold in pairs, with the WLL given per pair
• For non-flexing steel plate, jaw openings of 0-50mm and 0-60mm depending on the code
• For use only on steel with a hardness of 37 HRC (345 Brinell)

Key specifications

Choosing the right option

The clamp is to be used only on steel with a hardness of 37 HRC (345 Brinell).

Choose the code by the plate thickness it has to grip and the weight of the plate, remembering the WLL is per pair and the plate must be non-flexing.

Other Beaver lifting products: Beaver UC Universal Plate Clamps, 0.5 to 5 t, Beaver VC Vertical Plate Clamps, 1 to 3 t, Beaver Vertical Drum Lifting Clamp, 500kg WLL, 200 L Drums, Beaver YC Industrial Girder Clamps, 1 to 10 t.