BECO ISO 12240-1 E: 25 sizes BJ220U-2RS_BECO
Available
The BECO PTFE Lined Spherical Plain Bearing, Sealed is part of the BECO range. BECO maintenance-free radial spherical plain bearings to DIN ISO 12240-1 series E carry heavy radial load while letting the shaft sit out of square, which is the job a rolling bearing cannot do. The outer ring carries a PTFE sliding layer running against a hard chromium plated inner ring, so the joint runs dry, with no grease point and no relubrication schedule. That suits fixed-direction loads and any position where oil or grease is unwanted or cannot be reached.
It is sealed on both sides to keep dirt and water off the sliding surfaces. This range has 25 sizes with bores from 15 to 300mm.
Where this product is used
- Hydraulic and pneumatic cylinder eye ends
- Construction and earthmoving linkages
- Agricultural implements and three-point linkage
- Materials handling and conveyor pivots
- Crane and loader articulation
- Positions where a grease point cannot be reached or grease is unwanted
Features
- Takes misalignment a rolling bearing cannot: the shaft can sit out of square
- PTFE sliding layer against a hard chromium plated surface: runs dry, with no relubrication
- Sealed on both sides to keep dirt and water out of the joint
- Built to DIN ISO 12240-1 series E boundary dimensions
Key specifications
| Specification | Detail |
|---|---|
| Type | Radial maintenance-free |
| Standard | DIN ISO 12240-1 series E |
| Bore diameter d | 15 to 300mm |
| Outside diameter D | 26 to 430mm |
| Outer ring width B | 12 to 165mm |
| Inner ring width C | 9 to 120mm |
| Sphere diameter dK | 22 to 375mm |
| Sliding surfaces | Hard chromium on PTFE fabric |
| Sealing | 2RS seals, both sides |
| Lubrication | Maintenance-free, no relubrication |
| Brand | BECO |
Available sizes
| Designation | Bore d (mm) | Outer D (mm) | Width B (mm) | Inner ring C (mm) | Sphere dK (mm) | Misalignment angle |
|---|---|---|---|---|---|---|
| BJ15U-2RS | 15 | 26 | 12 | 9 | 22 | ±8° (series figure) |
| BJ17U-2RS | 17 | 30 | 14 | 10 | 25 | ±10° (series figure) |
| BJ20U-2RS | 20 | 35 | 16 | 12 | 29 | ±9° (series figure) |
| BJ25U-2RS | 25 | 42 | 20 | 16 | 35.5 | ±7° (series figure) |
| BJ30U-2RS | 30 | 47 | 22 | 18 | 40.7 | ±6° (series figure) |
| BJ35U-2RS | 35 | 55 | 25 | 20 | 47 | ±6° (series figure) |
| BJ40U-2RS | 40 | 62 | 28 | 22 | 53 | to |
| BJ45U-2RS | 45 | 68 | 32 | 25 | 60 | to |
| BJ50U-2RS | 50 | 75 | 35 | 28 | 66 | ±6° (series figure) |
| BJ60U-2RS | 60 | 90 | 44 | 36 | 80 | ±6° (series figure) |
| BJ70U-2RS | 70 | 105 | 49 | 40 | 92 | ±6° (series figure) |
| BJ80U-2RS | 80 | 120 | 55 | 45 | 105 | ±6° (series figure) |
| BJ90U-2RS | 90 | 130 | 60 | 50 | 115 | ±5° (series figure) |
| BJ100U-2RS | 100 | 150 | 70 | 55 | 130 | ±7° (series figure) |
| BJ110U-2RS | 110 | 160 | 70 | 55 | 140 | ±6° (series figure) |
| BJ120U-2RS | 120 | 180 | 85 | 70 | 160 | ±6° (series figure) |
| BJ140U-2RS | 140 | 210 | 90 | 70 | 180 | to |
| BJ160U-2RS | 160 | 230 | 105 | 80 | 200 | ±8° (series figure) |
| BJ180U-2RS | 180 | 260 | 105 | 80 | 225 | ±6° (series figure) |
| BJ200U-2RS | 200 | 290 | 130 | 100 | 250 | ±7° (series figure) |
| BJ220U-2RS | 220 | 320 | 135 | 100 | 275 | ±8° (series figure) |
| BJ240U-2RS | 240 | 340 | 140 | 100 | 300 | ±8° (series figure) |
| BJ260U-2RS | 260 | 370 | 150 | 110 | 325 | ±7° (series figure) |
| BJ280U-2RS | 280 | 400 | 155 | 120 | 350 | ±6° (series figure) |
| BJ300U-2RS | 300 | 430 | 165 | 120 | 375 | ±7° (series figure) |
Fitting and use
Press only on the ring being fitted, and never through the sliding surfaces of the joint.
PTFE lined bearings are maintenance-free and need no relubrication.
Choosing the right option
Select by bore d first, then check the outside diameter D, ring width and sphere diameter dK in the table against the housing and the mating part.
The misalignment angle shown is the nominal series figure. Check it against the movement the joint has to take.
PTFE lined joints suit steady, fixed-direction loads. For shock or alternating loads, the steel on steel type is the one built for it.
Also available from BECO: the PTFE lined open range, the heavy series PTFE lined range, the steel on steel sealed range.
| Option | Part number | SKU |
|---|---|---|
| 15 x 26 x 12 | BJ15U-2RS_BECO | A0213604 |
| 17 x 30 x 14 | BJ17U-2RS_BECO | A0213605 |
| 20 x 35 x 16 | BJ20U-2RS_BECO | A0213606 |
| 25 x 42 x 20 | BJ25U-2RS_BECO | A0213607 |
| 30 x 47 x 22 | BJ30U-2RS_BECO | A0213608 |
| 35 x 55 x 25 | BJ35U-2RS_BECO | A0213609 |
| 40 x 62 x 28 | BJ40U-2RS_BECO | A0213610 |
| 45 x 68 x 32 | BJ45U-2RS_BECO | A0213611 |
| 50 x 75 x 35 | BJ50U-2RS_BECO | A0213612 |
| 60 x 90 x 44 | BJ60U-2RS_BECO | A0213613 |
| 70 x 105 x 49 | BJ70U-2RS_BECO | A0213614 |
| 80 x 120 x 55 | BJ80U-2RS_BECO | A0213615 |
| 90 x 130 x 60 | BJ90U-2RS_BECO | A0213616 |
| 100 x 150 x 70 | BJ100U-2RS_BECO | A0213617 |
| 110 x 160 x 70 | BJ110U-2RS_BECO | A0213618 |
| 120 x 180 x 85 | BJ120U-2RS_BECO | A0213619 |
| 140 x 210 x 90 | BJ140U-2RS_BECO | A0213620 |
| 160 x 230 x 105 | BJ160U-2RS_BECO | A0213621 |
| 180 x 260 x 105 | BJ180U-2RS_BECO | A0213622 |
| 200 x 290 x 130 | BJ200U-2RS_BECO | A0213623 |
| 220 x 320 x 135 | BJ220U-2RS_BECO | A0213624 |
| 240 x 340 x 140 | BJ240U-2RS_BECO | A0213625 |
| 260 x 370 x 150 | BJ260U-2RS_BECO | A0213626 |
| 280 x 400 x 155 | BJ280U-2RS_BECO | A0213627 |
| 300 x 430 x 165 | BJ300U-2RS_BECO | A0213628 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
BECO PTFE Lined Spherical Plain Bearing, Sealed: 220 x 320 x 135
SKU: A0213624 | Model: BJ220U-2RS_BECO
BECO BJ220U-2RS_BECO: ISO 12240-1 E: 25 sizes, 220 x 320 x 135mm bore diameter x outer diameter x width. Designation: BJ220U-2RS. Type: Radial maintenance-free, DIN ISO 12240-1 series E.

