Brady M5-01-425-FT B-425D T-Flag Polypropylene Wire and Cable Labels, 40 x 30 mm
Available
The Brady M5-01-425-FT is a cartridge of 200 pre-cut T-flag labels for marking small-diameter wires and data cables from a Brady M5 series printer: the BMP51, BMP53, M510 and M511 (manufacturer-stated). Each label is a matte white polypropylene T-flag, 40 mm high by 30 mm wide, with a 20 x 30 mm printable area, printed black by thermal transfer (manufacturer-stated).
The material is B-425D, a 0.11 mm matte polypropylene with a permanent acrylic adhesive. It works from -80 to 130 °C in service and resists chemicals and solvents (manufacturer-stated). Brady lists it for indoor use and does not recommend it outdoors (manufacturer-stated). Brady lists UL recognition to UL969, CSA to C22.2 No. 0.15-95 and RoHS compliance to 2011/65/EU, with exemptions, and describes the label as halogen-free (manufacturer-stated). UL969 and C22.2 are North American standards, and Brady's data sheets can tie this recognition to a specific ribbon, so ask us if the approval matters for your job. Figures are Brady published values (manufacturer-stated).
The product code is the alphanumeric code printed on the cartridge, M5-01-425-FT, and it is the code to search for or quote. The Brady ordering number for the same product is 170860. Brady lists these products as supplied with ribbon (manufacturer-stated).
Where this product is used
- Wire and cable labelling, including small-diameter data cables (manufacturer-stated).
- Data and telecommunications labelling (manufacturer-stated).
- Asset tracking, barcode, inventory and inspection labelling (manufacturer-stated).
- Component and equipment labelling, and general identification, indoors (manufacturer-stated).
Features
- Pre-cut T-flag labels for small-diameter wires and data cables (manufacturer-stated)
- Matte polypropylene with permanent acrylic adhesive (manufacturer-stated)
- Service temperature -80 to 130 °C (manufacturer-stated)
- Chemical and solvent resistant (manufacturer-stated)
- UL969 recognised and CSA C22.2 No. 0.15-95 listed, ribbon dependent (manufacturer-stated)
- Halogen-free (manufacturer-stated)
- RoHS compliant to 2011/65/EU, with exemptions (manufacturer-stated)
- 200 labels per cartridge
Common specifications
| Specification | Detail |
|---|---|
| Material | Polypropylene, B-425D, matte (manufacturer-stated) |
| Adhesive | Permanent acrylic (manufacturer-stated) |
| Label size | 40 x 30 mm (1.575 x 1.181 in), T-flag, rounded corners (manufacturer-stated) |
| Printable area | 20 x 30 mm (0.788 x 1.18 in) (manufacturer-stated) |
| Labels per cartridge | 200 (manufacturer-stated) |
| Thickness | 0.11 mm (manufacturer-stated) |
| Service temperature | -80 to 130 °C (manufacturer-stated) |
| Use | Indoor; outdoor use not recommended (manufacturer-stated) |
| Standards listed | UL969 recognised; CSA C22.2 No. 0.15-95; RoHS 2011/65/EU with exemptions; halogen-free (manufacturer-stated) |
| Print method | Thermal transfer (manufacturer-stated) |
| Printer compatibility | BMP51, BMP53, M510, M511 (manufacturer-stated) |
Key specifications
| Product code (printed on cartridge) | Brady ordering no. | Label size H x W (mm) | Printable area H x W (mm) | Labels per cartridge | Barcode (UPC) |
|---|---|---|---|---|---|
| M5-01-425-FT | 170860 | 40 x 30 | 20 x 30 | 200 | 888434592878 |
Selecting the right option
This is a flag label, so it suits cables and wires where the printed area should stand out from the cable. Brady does not publish the tail length on the product page, so check the label size against your cable before ordering. For labels that wrap or stick flat see the B-422 polyester labels and tape and the B-595 die-cut vinyl labels.
Related products
Other Brady M4/M5 label ranges: B-595 die-cut vinyl labels, B-595 vinyl label tape cartridges, B-584 retro-reflective label tape and B-422 polyester labels and tape.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
