Challenger girder clamp for I-beams, 5000kg load capacity
Available
There are 5 models, with a beam width range from 80mm to 350mm.
It has an adjustable pin that fits various beam widths, jaws that clamp over the girder flanges, quick installation and repositioning for maintenance tasks, suitability for lifting I-beams, and steel construction with no aluminium. The beam width range is not the same on every size: 80 to 240mm on the 1 and 2 tonne, 90 to 330mm on the 3 and 5 tonne, and 90 to 350mm on the 10 tonne.
Where this product is used
- Suspending a chain block or lever block from an I-beam in a workshop or maintenance bay
- Temporary lifting points on a beam where no fixed trolley is installed
- Maintenance lifts where the clamp is moved along the beam
Features
- Rated capacity from 1 tonne to 10 tonne
- Adjustable pin to fit various beam widths
- Jaws clamp over the girder flanges
- Quick to install and reposition
- Steel construction, no aluminium
Key specifications
| Specification | Detail |
|---|---|
| Brand | Challenger |
| Rated capacity | 1 tonne to 10 tonne |
| Beam width range | 80 to 350mm, set by size |
| Material | Steel, no aluminium |
| Standard | AS4991 |
| Net weight | 3.5kg, 4.5kg, 9.5kg, 11kg, 16kg |
Choosing the right option
Match the clamp to your beam: check the beam flange width against the range for the size, then keep the load inside the rated capacity. Check the beam itself can carry the load. Lifting equipment must be used within its rated capacity, inspected before each use, and selected and used in line with your site lifting procedure and the applicable standards and regulations. Do not use it to lift or lower people. If you are unsure what suits your lift, speak to a qualified rigger before ordering.
See also: Challenger push beam trolleys, Challenger chain blocks Generation II, Challenger lever blocks Gen II.
| Option | Part number | SKU |
|---|---|---|
| 1000 | CGC101 | A0100067 |
| 2000 | CGC102 | A0100068 |
| 3000 | CGC103 | A0100069 |
| 5000 | CGC105 | A0100070 |
| 10000 | CGC106 | A0100071 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Challenger Girder Clamp, 1 to 10 Tonne, I-Beam 80 to 350mm: 5000
SKU: A0100070 | Model: CGC105
Challenger CGC105: girder clamp, 5 tonne (5,000kg) rated capacity, 90 to 330mm beam width range, net weight 11kg.

