CRC 808 Silicone Spray Multi-Purpose Lubricant 330g Aerosol

CRC 808 Silicone is a multi-purpose silicone spray. CRC lists it as cleaning, shining, lubricating, waterproofing and reviving, and as clear and non-staining. It reduces friction, noise and wear.

CRC says it is harmless to most materials: metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints, and it can also be used as a mould release, parting agent and machine bed lubricant. This page covers the 330g aerosol, CRC product number 3055.

Where this product is used

• Automotive: door locks, hinges, linkages, window guides and bushes, rubber mouldings, weather strips, grommets, o-rings, rubber seals, dashboards and plastic parts
• Industrial: studs, bolts and nuts, hoists, tracks, lifting gear and blocks, pumps, compressors, conveyor rollers and shutters
• Home: sliding doors, locks, catches, curtain and shower tracks, drawer slides, castors, hinges and plastic rollers
• Sports: ski equipment, bicycles, skateboards, roller blades, roller skates, golf trundlers and yacht rigging gear
• Mould release, parting agent and machine bed lubricant

Features

• Cleans, shines, lubricates, waterproofs and revives
• Clear and non-staining
• Reduces friction, noise and wear
• Effective from -38 °C to 290 °C
• Harmless to most materials: metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints
• Dries in 5 minutes to a clear oily film
• Extension tube for hard-to-reach areas

Key specifications

Selecting the right option

For a silicone spray with a different formulation see CRC Aerosol Extreme Duty Silicone Lubricant 300g or CRC Automotive Silicone Lubricant & Protectant Aerosol 300g. Each has its own data sheet, temperature range and hazard classification.

Using it

Shake the can well.

Hold it 30 cm from a clean, dry surface and spray evenly.

Use the extension tube for hard-to-reach areas.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Do not pierce or burn the can, even after use.

Limits and safety

SDS classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Transport class UN 1950, Aerosols, Class 2.1. CRC's data sheet warns that deliberately sniffing or inhaling the concentrated contents can be harmful or fatal. Keep away from heat and ignition sources. Incompatible with oxidising agents (for example hypochlorites), acids (for example nitric acid) and alkalis (for example sodium hydroxide). Read the safety data sheet before use.

Frequently asked questions

What temperature range does CRC 808 Silicone cover?

CRC's technical data sheet gives -38 °C to 290 °C.

What materials is CRC 808 Silicone harmless to?

CRC lists it as harmless to most materials: metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints.

Is CRC 808 Silicone a dangerous good?

Yes for transport. The CRC safety data sheet lists UN 1950, Aerosols, Class 2.1.

Can CRC 808 Silicone be used as a mould release?

CRC lists it as a mould release, parting agent and machine bed lubricant.

How long does CRC 808 Silicone take to dry?

CRC gives a drying time of 5 minutes, leaving a clear oily film.

What is the flash point of CRC 808 Silicone?

The CRC safety data sheet gives a flash point below 10 °C, and the can is classed as an extremely flammable aerosol.

Related products

See also: CRC Aerosol Extreme Duty Silicone Lubricant 300g, CRC Aerosol Silicone Electrical Multi-Use Lubricant 300g, CRC Automotive Silicone Lubricant & Protectant Aerosol 300g, CRC 5-56 Multi-Purpose Lubricant.