CRC Aerosol Lectra Clean Electric Motor & Equipment Cleaner 400g
Available
CRC Lectra Clean, named CRC NF Lectra Clean by CRC, is a non-flammable evaporating cleaner and degreaser for use on electric motors. It has no flash point, evaporates rapidly and completely, and leaves no residue.
CRC lists it for electrical equipment, parts and components, mechanical tools and components, marine and industrial engines, and laboratory equipment. The SDS lists chlorinated solvents in the composition and classifies the product as suspected of causing cancer.
Where this product is used
- Electrical equipment, parts and components
- Mechanical tools and components
- Marine and industrial engines
- Laboratory equipment
Features
- Non-flammable with no flash point, which CRC says significantly reduces the risk of fire from incidental contact
- Rapid and complete evaporation, leaving no residue
- Non-conductive and non-corrosive, per CRC
- Quickly penetrates hard-to-reach areas
- Contains no lubricants, silicones or oils
- Insoluble in water
Key specifications
| Specification | Detail |
|---|---|
| Product type | Non-flammable evaporating cleaner and degreaser for electric motors, aerosol |
| CRC product number | 2018 |
| Pack | 400g aerosol |
| Appearance | Colourless liquid |
| Odour (SDS) | Mild solvent odour |
| Composition (SDS) | Tetrachloroethylene 50 to 80%; dichloromethane 10 to 30%; carbon dioxide 5%; COZOL 805 5% |
| Flash point | None (CRC); not relevant (SDS) |
| Boiling point (concentrate, excluding propellant) | 86 °C |
| Specific gravity (CRC) | 1.51 at 20 °C |
| Kauri-butanol value (ASTM D-1133) | 130 |
| Dielectric strength (ASTM D-877) | 36,700 volt |
| Dangerous goods | UN 1950, AEROSOLS, Class 2.2 |
| Source | CRC Industries (Aust) technical data sheet 05/2026 and safety data sheet 03 Apr 2025 (revision 1.2) |
Selecting the right option
For a 4l pack see CRC Lectra Clean Electric Motor & Equipment Cleaner TCE Free 4L.
Using it
Remove access plates to expose the equipment interior. For heavy deposits, remove them by scraping first.
Spray liberally and allow the product to run off. Air dry or dry with a soft wiper, and repeat if necessary.
Test on a small area before using: it may be harmful to some plastics.
Storage and handling
Store in a cool, dry, well ventilated area, away from incompatible substances, heat, ignition sources and foodstuffs. Protect from sunlight and do not expose to temperatures above 50 °C. Store locked up.
Limits and safety
SDS classification: Warning. Pressurised aerosol, Category 3 (H229), causes skin irritation (H315), causes serious eye irritation (H319), suspected of causing cancer (H351), toxic to aquatic life with long lasting effects (H411). UN 1950, Class 2.2. The SDS also lists it as a marine pollutant and as Schedule 6 (S6) under the SUSMP poisons standard, says it will attack most forms of plastics, and states that tetrachloroethylene and dichloromethane are classified as probably carcinogenic to humans (IARC Group 2A). Read the safety data sheet before use.
Frequently asked questions
Is CRC Lectra Clean non-flammable?
Yes. CRC lists it as non-flammable with no flash point, and the SDS (revision 1.2, 03 Apr 2025) classes it as a pressurised aerosol, Category 3, UN 1950, Class 2.2.
Can CRC Lectra Clean be used on energised equipment?
CRC's current technical data sheet (05/2026) says it can be used on energised equipment and that it cleans low-voltage motors and equipment while in operation. CRC's earlier data sheet did not recommend this, so ask CRC if you are unsure.
Is CRC Lectra Clean hazardous to health?
The SDS classes it Warning: causes skin irritation and serious eye irritation, suspected of causing cancer (H351), and toxic to aquatic life with long lasting effects (H411). Read the safety data sheet before use.
What is the dielectric strength of CRC Lectra Clean?
CRC gives 36,700 volt, tested to ASTM D-877.
What is in CRC Lectra Clean?
The SDS lists tetrachloroethylene (50 to 80%), dichloromethane (10 to 30%), carbon dioxide (5%) and COZOL 805 (5%).
How do I use CRC Lectra Clean?
Remove access plates, scrape off heavy deposits, then spray liberally and let it run off. Air dry or use a soft wiper, and repeat if necessary. Test on a small area first.
Related products
See also: CRC Lectra Clean Electric Motor & Equipment Cleaner TCE Free 4L, CRC Lectra Clean Heavy Duty Electrical Parts Degreaser 20L.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details

