CRC Power Lube with PTFE High Performance Lubricant 300g Aerosol

CRC Power Lube with PTFE is a multi-purpose lubricant with PTFE and extreme pressure additives. CRC states a Falex load test result of 3,750 lbs (ASTM D-3233).

Its low viscosity film penetrates cracks, crevices and joints, spreads a thin even film and displaces moisture and surface contaminants. The SDS carries several health and environmental hazard statements, so read the hazard section before use. This page covers the 300g aerosol, CRC product number 3045.

Where this product is used

• Bearings, gears, linkages, motors, chains, cables and rollers
• Guide bars, pulleys, cams, valves, ball joints, hinges and slides
• Cutting tools, taps, dies and pistons
• Handling equipment, conveyors, hoists, lifts, doors and fans

Features

• Extreme pressure additives for longer lasting lubrication
• PTFE additive that minimises surface contact and friction to reduce wear and extend equipment life
• Low viscosity film penetrates cracks, crevices and joints
• High surface tension: spreads a thin, even film and displaces moisture and surface contaminants
• Falex Load Test (ASTM D-3233): 3,750 lbs

Key specifications

Selecting the right option

For a dry film PTFE lubricant see CRC Aerosol Dry Glide With PTFE 150g; for a general multi-purpose lubricant see CRC 5-56 Multi-Purpose Lubricant. Each has its own data sheet and hazard classification.

Using it

Shake well.

Freeing rusted parts: spray liberally and allow to penetrate. Use a mild abrasive or wire brush on heavy rust, and repeat if needed.

Lubricating: spray an even coat, and reapply after the first coat has penetrated.

Corrosion protection: apply an even coat over all metal parts and do not wipe off the film.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Keep away from heat and ignition sources. Do not pierce or burn the can, even after use. The pressurised container may burst if heated.

Limits and safety

SDS classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Causes skin irritation (H315), may cause an allergic skin reaction (H317) and causes serious eye irritation (H319). May cause drowsiness or dizziness (H336). Suspected of damaging fertility or the unborn child (H361). May cause damage to organs through prolonged or repeated exposure (H373). Toxic to aquatic life with long lasting effects (H411). Transport class UN 1950, Aerosols, Class 2.1. The NSF H2 registration is not a food grade (H1) listing. Read the safety data sheet before use.

Frequently asked questions

What load does CRC Power Lube with PTFE carry?

CRC's technical data sheet gives 3,750 lbs in the ASTM D-3233 Falex Load Test.

Is CRC Power Lube with PTFE NSF registered?

The CRC technical data sheet states NSF H2, registered for use in meat and poultry plants, which means no food contact. It is not stated as H1.

Is CRC Power Lube with PTFE a dangerous good?

Yes for transport. The CRC safety data sheet lists UN 1950, Aerosols, Class 2.1.

Does CRC Power Lube with PTFE carry health warnings?

Yes. The SDS gives signal word Danger, with H361 (suspected of damaging fertility or the unborn child), H373 (organ damage on prolonged or repeated exposure), H317 (allergic skin reaction) and H411 (toxic to aquatic life).

How do I use it to free a rusted part?

Spray liberally and allow it to penetrate, use a mild abrasive or wire brush on heavy rust, and repeat if needed.

Related products

See also: CRC Aerosol Dry Glide With PTFE 150g, CRC 5-56 Multi-Purpose Lubricant, CRC Aerosol Wire Rope & Cable Lubricant 285g, CRC Aerosol Extreme Duty Silicone Lubricant 300g.