CRC Food Grade Silicone Spray Multi-Purpose 283g

CRC Food Grade Silicone is a multi-purpose silicone spray that leaves a clear, dry film. It comes in a 283g aerosol, and CRC states it is NSF H1 registered for incidental food contact.

CRC lists it for food processing and handling equipment, as a release and parting agent on food sorting and handling lines, and as protection against moisture. CRC says the dry film does not attract dust and product debris.

Where this product is used

• Food processing and handling equipment
• Release and parting agent on food sorting and handling lines
• Protection against moisture
• General lubricant for metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints, as listed by CRC

Features

• NSF H1 registered for incidental food contact (CRC technical data sheet wording)
• Clear, dry film that does not attract dust and product debris
• Release and parting agent for food sorting and handling lines
• Temperature range -40 °C to +200 °C
• Dielectric strength 350 volts/mil (ASTM D-877)
• Colourless film, odourless once dry
• 360 degree valve for spraying from any angle

Key specifications

Selecting the right option

This 283g aerosol is a dry film product. For the 443ml pack see CRC Lubricant Food Grade Silicone NSF H1 Multi-Purpose Spray 443ml, which is a different formulation with its own data. CRC also lists a water based food grade silicone, CRC Water Based Food Grade Silicone NSF H1 Multi-Purpose Spray 369g.

Using it

Do not apply while equipment is energised.

Spray light, even coats on the areas that need lubrication or moisture protection. Repeat until adequate lubrication or protection is achieved, using only what is necessary.

Re-apply as needed.

Storage and handling

CRC gives a conditional warranty of 5 years from date of manufacture. Keep the can away from heat and do not expose it to temperatures above 50 °C.

Limits and safety

SDS classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). May be fatal if swallowed and enters airways (H304). May cause drowsiness or dizziness (H336). Transport class: UN 1950, Aerosols, Class 2.1. Keep away from heat and ignition sources. Do not apply while equipment is energised. Read the safety data sheet before use.

Frequently asked questions

Is CRC Food Grade Silicone NSF H1 registered?

CRC's technical data sheet states 'NSF H1 Registered for incidental food contact'. The NSF registration is No. 130884, in a letter dated 01/08/03.

What temperature range can CRC Food Grade Silicone be used over?

CRC gives -40 °C to +200 °C.

What is the dielectric strength of CRC Food Grade Silicone?

CRC gives 350 volts/mil tested to ASTM D-877, which is about 13.8 kV/mm converted. Do not apply it while equipment is energised.

Is CRC Food Grade Silicone flammable?

Yes. The safety data sheet classes it as an extremely flammable aerosol (H222), UN 1950, Class 2.1. Keep it away from heat and ignition sources.

Can I spray CRC Food Grade Silicone on live equipment?

No. CRC's directions say not to apply it while equipment is energised.

What is CRC Food Grade Silicone used for?

CRC lists food processing and handling equipment, a release and parting agent on food sorting and handling lines, and moisture protection.

Related products

See also: CRC Lubricant Food Grade Silicone NSF H1 Multi-Purpose Spray 443ml, CRC Water Based Food Grade Silicone NSF H1 Multi-Purpose Spray 369g, CRC Food Grade Machine Oil 312g, CRC Industrial Silicone Mould Release Food Grade 326g, CRC Industrial Food Grade Silicone Grease 75ml.