CRC Lanoshield Natural Protects & Lubricates 350g

CRC Lanoshield is a natural, non-evaporative lanolin lubricant and corrosion protectant in a 350g aerosol. It sprays a light brown liquid with a wool fleece odour, and CRC states it contains no silicone or acids.

CRC gives an average film thickness of 1 to 2 microns, with expected coverage of 90-100 m² per litre. CRC lists marine, agricultural, engineering, home and electrical uses.

Where this product is used

• Marine: outboards, cables, electronics, fishing equipment, rollers and trailers
• Agricultural: cultivators, conveyors, slashers, irrigation equipment and farm machinery
• Engineering: metal protection, machinery maintenance, tools, chains and gears, anti-seize and release agent, mould release
• Home: camping and sporting equipment, hinges, locks and garage doors
• Electrical: protecting PCBs and switch gear, and inhibiting oxidisation and salt crystallisation in corrosive atmospheres

Features

• Natural lanolin formula that is non-evaporative, per CRC
• Continuous, stable film averaging 1 to 2 microns
• Expected coverage 90-100 m² per litre
• Contains no silicone or acids, per CRC
• CRC states it is harmless to metal, plastics, paints, fibreglass, rubber and neoprene seals, but also says not to use it on polycarbonate
• Light brown liquid with a wool fleece odour

Key specifications

Selecting the right option

For long-term anti-rust lubrication in other formats see CRC Aerosol Long Life Anti Rust Lubricant 300g. For marine lubrication see CRC 5-56 Marine Multi-Purpose Oil 300g.

Using it

Shake well and spray onto clean, dry surfaces.

After the carrier solvent evaporates, polish with a dry lint-free cloth if required.

Do not use on energised equipment. For personal safety allow the solvent to evaporate before re-energising.

Storage and handling

Keep the can away from heat and do not expose it to temperatures above 50 °C.

Limits and safety

SDS classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Transport class: UN 1950, Aerosols, Class 2.1. Do not use on polycarbonate. Not for sensitive electronics, computers, tape decks or VCRs. Do not use on energised equipment. Keep away from heat and ignition sources. Read the safety data sheet before use.

Frequently asked questions

What is CRC Lanoshield made from?

CRC describes a natural, non-evaporative lanolin formula. The safety data sheet lists lanolin at 30 to 60%, and CRC states it contains no silicone or acids.

How much area does CRC Lanoshield cover?

CRC's technical data sheet gives expected coverage of 90-100 m² per litre at an average film thickness of 1 to 2 microns.

Can I use CRC Lanoshield on polycarbonate or sensitive electronics?

No. CRC says not to use it on polycarbonate, and not for sensitive electronics, computers, tape decks or VCRs.

Is CRC Lanoshield flammable?

Yes. The safety data sheet classes it as an extremely flammable aerosol (H222) with a flash point below 0 °C, UN 1950, Class 2.1. Keep it away from heat and ignition sources.

How do I apply CRC Lanoshield?

Shake well and spray onto clean, dry surfaces. Once the carrier solvent has evaporated, polish with a dry lint-free cloth if required.

Can I spray CRC Lanoshield on energised equipment?

No. CRC says not to use it on energised equipment, and to let the solvent evaporate before re-energising.

Related products

See also: CRC Aerosol Long Life Anti Rust Lubricant 300g, CRC 5-56 Marine Multi-Purpose Oil 300g, CRC Aerosol Soft Seal Long Term Protection For Metal Surfaces 300g, CRC Aerosol Tackle Guard 100g, CRC Aerosol Wire Rope & Cable Lubricant 285g.