M10 Fork Terminal, 316 Stainless Steel - FTEA4M10X6MM

The Fork Terminal, 316 Stainless Steel is available in 4 sizes (M5 to M10) and is a stainless swage fitting with a fork (jaw) end. The other end is swaged onto wire rope.

Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments.

You can choose from 4 variants, covering sizes M5 to M10. Pack quantities depend on size: packs of 2 to 10.

In wet conditions, keep stainless steel apart from aluminium and galvanised steel with a washer or sleeve, to reduce the risk of galvanic corrosion.

Where this product is used

• Shade sails, awnings and tensioned structures
• Boat, jetty and waterfront structures
• Marine rigging, boat and yacht fittings
• Architectural work near the coast
• Coastal and architectural fittings

Features

• Fork end fits over a bolt or lug
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Choice of 4 sizes, M5 to M10
• Swaged onto wire rope
• Pack quantities to suit trade and bulk buying: packs of 2 to 10

Key specifications

Selecting the right option

Choose the terminal by the wire rope diameter shown on the variant. A swaging tool is needed.

Important

Do not use this product to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.