Gates BX45 (9013-6045) Tri-Power Notched

Gates Tri-Power Notched (Cogged) Classical Section Belt - BX Section: BX45

SKU: A0018277 | Model: 9013-6045

This is the v-belt code BX45 option of the Gates Tri-Power Notched (Cogged) Classical Section Belt - BX Section. Key details for this option: effective length 1221mm, length 1219mm, top width 17mm, depth 11mm.

Gates Tri-Power Belt Classical Section - Heavy Duty V Belt

Gates Tri-Power V Belt is built for superior performance on heavy duty drives of classical cross-section.

The raw edge construction and special notch design makes the Tri-Power belt especially suited for drives requiring small diameter pulleys and back idlers.

The ethylene EPDM compound allows the belt to handle extreme temperatures up to +121°C.

Construction

Classical cross-section.

Exclusive ethylene EPDM rubber compound for increased temperature range to resist cracking.

Fibre-loaded compound for improved belt stability.

Raw edge construction.

The moulded notch pattern also reduces noise.

Precision-ground sidewalls give a uniform wedging action.

Flex-Bonded polyester cords for equal load distribution and reduced stress from flexing.

Non self-igniting - the belt will not catch fire from heat build-up, even with severe slippage.

Static conductive - ISO 1813 and RMA IP3-3.

Advantages

15% capacity increase over wrapped belts.

Increase efficiency up to 3% over wrapped belts.

Use smaller diameter pulleys than wrapped belts.

Moulded notches reduce and evenly distribute thermal and bending stresses.

Match free system: all sizes meet Gates V80® tolerances, can be installed without matching.

Back idlers can be used.