Ko-Ken KO10722A32 Impact Inhex Bit, 1 in, 22 mm Hex Input

The Ko-Ken 107-22 is an impact inhex bit with a 22 mm input hex end. (manufacturer-stated)

Hex sizes run from 5/8 to 1-1/4 in.

Overall lengths are 50 and 55 mm. (manufacturer-stated)

Each model is listed in the table below with its specifications.

Where this product is used

• Driving inhex (hex socket) screws with an impact bit holder that takes a 22 mm input hex
• Machinery and equipment maintenance where hex socket fasteners are used
• Workshop and maintenance work

Features

• 22 mm input hex end (manufacturer-stated)
• Impact bit for hex socket screws
• Listed in the Impact Sockets section of the catalogue (manufacturer-stated)

Common specifications

Key specifications

Lengths and weights are manufacturer-stated (Ko-ken catalogue 2025-26).

Selecting the right option

Choose the hex size to match the screw, and use the bit in an impact bit holder that takes a 22 mm input hex. A catalogue footnote says the items it marks have a larger output size than the 22 mm input hex drive, so their maximum output torque rating is less than standards. Check the marked sizes in the Ko-ken catalogue before using at high torque. (manufacturer-stated) The catalogue's safety notes say to select impact sockets only for electric or air impact wrenches, to wear safety goggles when using nut runners or impact wrenches, never to substitute a hand socket for an impact socket, and to replace sockets with cracked walls, battered points or other marks of wear. (manufacturer-stated)

Related products

Related Ko-Ken products: Ko-Ken 107-22 Impact Inhex Bit, 17 to 32 mm, 50 and 55 mm Long, 22 mm Hex Input, Ko-Ken 121H Hex Bit, 2 to 6 mm, 70 and 100 mm Long, 1/4 in Hex Shank, Ko-Ken 183H-35 Impact Hex Bit, Metric Sizes, 7/16 in Hex Input and Ko-Ken 14106 and 18106 Impact Bit Holder, 43 and 68 mm Long, 1/2 and 1 in Drive.