M5 (3.2mm Wire) Mini Fork Terminal, 316 Stainless Steel - TENSION-CARD

This 316 stainless steel mini fork terminal is a small stainless swage fitting with a fork (jaw) end, for fine wire rope. The other end is swaged onto the wire rope.

Made from 316 (A4) stainless steel, the grade normally specified for chloride-exposed work such as coastal installations, swimming pools, marine fittings and food-processing plant.

This listing is a single size: M5 (3.2mm Wire). Every size comes in packs of 10.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Balustrade and wire fencing
• Outdoor fittings exposed to salt air
• Shade sails, awnings and tensioned structures
• Boat, jetty and waterfront structures
• Coastal and architectural fittings

Features

• Compact size for fine wire
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Fork end fits over a bolt or lug
• Supplied in packs of 10

Key specifications

Selecting the right option

Choose the terminal by the wire rope diameter shown on the variant. A swaging tool is needed.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.