Pacific Hoists lever block, Capacity 6.3 Tonne

There are 6 models, with a lift of 1m on the smallest and 1.5m on the others.

Free wheel and non-free wheel capabilities, brake lockout protection, double pawl safety springs that prevent sticking, a cast hand wheel, "T" type hooks (excluding the 250kg capacity), and encapsulated needle and side plate bearings. For each model the range gives the rated capacity, lift, chain falls, load chain size and net weight. The 6.3 tonne model runs on 2 chain falls and the others on 1. This range against Australian Standard AS1418.2.

Where this product is used

• Lifting and positioning loads by hand lever in workshops, maintenance bays and on site
• Fitting, assembly and repair work on machinery and fabrications
• Short lifts where there is no power

Features

• Rated capacity from 0.25 tonne to 6.3 tonne
• Free wheel and non-free wheel capabilities
• European zinc-plated grade 80 load chain, CNC machined before heat treatment
• Brake lockout protection
• Double pawl safety springs that prevent sticking
• "T" type hooks, excluding the 250kg capacity
• Encapsulated needle and side plate bearings

Key specifications

Choosing the right option

Choose the capacity on your heaviest lift and keep the load inside the rated capacity on the specifications. The lift is 1.5m on all models except the 0.25 tonne, which is 1m, so check that is enough for the job: for a longer lift, use a chain block. If you want an overload protection version, see the lever block with overload protection. Lifting equipment must be used within its rated capacity, inspected before each use, and selected and used in line with your site lifting procedure and the applicable standards and regulations. Do not use it to lift or lower people. If you are unsure what suits your lift, speak to a qualified rigger before ordering.

See also: Pacific lever blocks with overload protection, Challenger lever blocks Gen II, Pacific chain blocks.