Pferd ZYA burr, 6 x 16mm

The Pferd ZYA Cylindrical Burr is a tungsten carbide burr in cut 5 with a 6mm shank. The range has 2 options, with head sizes of 6 x 16 and 12 x 25mm (diameter x cut length) and total lengths of 55 to 65mm.

The ZYA is a cylindrical burr to DIN 8032, with the cut conforming to DIN 8033, for general use on all materials. Cut 5 is the fine cut: it is for fine machining of steel, cast iron, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys, with a good surface. Key features: long tool life and a high surface finish, reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity.

Where this product is used

• Fine machining of steel, cast iron and stainless steel (INOX)
• Fine machining of nickel-based and cobalt-based alloys
• General use on all materials

Features

• Cut 5: fine cut for a good surface
• Cylindrical head without end cut, 6mm shank
• Head sizes 6 x 16 and 12 x 25mm, total length 55 to 65mm
• Long tool life and a high surface finish
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity

Key specifications

Choosing the right option

Check that your tool holds a 6mm shank. For higher stock removal, use cut 3 PLUS. Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr.

Same cut in other shapes: Pferd ZYAS Cylindrical End Cut Burr, Cut 5, 3mm Shank, 2 x 10 to 6 x 13mm, Pferd WRC Cylindrical Radius End Burr, Cut 5, 3mm Shank, 3 x 13 and 6 x 13mm.

Same shape in other cuts: Pferd ZYA Cylindrical Burr, Cut 3 PLUS, 6mm Shank, 4 x 13 to 16 x 25mm, Pferd ZYA Cylindrical Burr, INOX Cut, 6mm Shank, 6 x 16 and 12 x 25mm.