Pferd 21728014 Conical Radius End Burr KEL, ALLROUND, 6.35 mm Shank

This Pferd conical burr with radius end (KEL) is a tungsten carbide burr in ALLROUND cut on a 6.35 mm shank (1/4 in) (manufacturer-stated). This page lists 2 items, head sizes 1/4 x 5/8 and 3/8 x 1 3/16 in.

The PFERD catalogue describes the ALLROUND cut as giving a high stock removal rate on key materials such as steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated).

The PFERD catalogue describes the KEL as a conical burr with round radius end according to DIN 8032 for versatile, economical and time-saving use on steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated).

Features listed: comfortable working thanks to reduced vibration and less noise; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).

Some head dimensions are not published for this listing because the figures available do not agree; check the item number and shank, and confirm head size with us if it matters for your job.

Where this product is used

• Steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated)
• Versatile, economical and time-saving use across these materials (manufacturer-stated)

Features

• Tungsten carbide, conical shape with radius end (KEL) (manufacturer-stated)
• ALLROUND: high stock removal rate on steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated)
• 6.35 mm shank (1/4 in) (manufacturer-stated)
• Comfortable working thanks to reduced vibration and less noise (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)

Common specifications

Key specifications

Dimensions in mm: d1 head diameter, l2 cut length, d2 shank diameter, l1 overall length. Each item number is one head size.

Selecting the right option

Choose the head size and shank to suit the job and your tool; the table lists each item number with its dimensions. The catalogue gives a cutting speed of 450 to 750 m/min for steels up to 1,200 N/mm2, and the rotational speed follows from the burr diameter (manufacturer-stated). Do not exceed the maximum permitted rotational speed, observe the recommended rotational speed (especially with long shanks), wear eye and hearing protection and a dust mask, and do not use a damaged burr or use the burr for cutting (manufacturer-stated).

Related products

Same shape and cut in other sizes or shanks: Pferd Conical Radius End Burr KEL, ALLROUND, 10 x 20 and 12 x 25 mm, 6 mm Shank. Same shape with other cuts: Pferd Conical Radius End Burr KEL, Cut 3 PLUS, 5/16 x 7/8 to 1/2 x 1 1/16 in, 6.35 mm Shank and Pferd Conical Radius End Burr KEL, MX NCC, 3/8 x 1 1/8 and 1/2 x 1 in, 6.35 mm Shank. Same cut in other shapes: Pferd Conical Pointed Burr SKM, ALLROUND, 6.35 x 25.4 and 12.7 x 25.4 mm, 6.35 mm Shank and Pferd Tree Shape Burr RBF, ALLROUND, 6.35 x 15.9 to 12.7 x 25.4 mm, 6.35 mm Shank.