Pferd 43468902 Crimped Cup Brush TBU 60 mm, M14 x 2, Steel Wire 0.30 mm
Available
The Pferd TBU is a crimped cup brush. It has an M14 x 2 thread and steel wire filament. This page lists 3 items: 60 mm, 75 mm and 100 mm (brush diameter).
The catalogue describes the TBU as suited to medium-duty brushing such as deburring, cleaning and derusting on large surfaces (manufacturer-stated).
Filament diameter is 0.30 mm. Optimum and maximum speeds depend on the size: maximum speeds run from 8,500 to 12,500 rpm, so check the figures for the item you choose (manufacturer-stated).
Steel wire: high tensile and bending fatigue strength, temperature resistance up to 300°C (manufacturer-stated).
Special features listed in the catalogue: highly flexible, so it adjusts to the workpiece contour; creates fine surfaces (manufacturer-stated).
Where this product is used
- Suited to medium-duty brushing such as deburring, cleaning and derusting on large surfaces (manufacturer-stated)
- Steel wire is rated highly suitable for steel and cast iron, and suitable for plastics (manufacturer-stated)
Features
- Brush diameters 60 mm, 75 mm and 100 mm
- M14 x 2 thread (manufacturer-stated)
- Steel wire (ST), filament diameter 0.30 mm (manufacturer-stated)
- Highly flexible, so it adjusts to the workpiece contour (manufacturer-stated)
- Creates fine surfaces (manufacturer-stated)
Common specifications
| Specification | Detail |
|---|---|
| Brush diameters | 60 mm, 75 mm and 100 mm |
| Thread (DT) | M14 x 2 (manufacturer-stated) |
| Filament diameter (DF) | 0.30 mm (manufacturer-stated) |
| Filament material | Steel wire (ST) (manufacturer-stated) |
Key specifications
| Model | Designation | Brush diameter (D) | Filament length (LT) | Optimum speed | Maximum speed |
|---|---|---|---|---|---|
| 43468902 | POS TBU 60/M14 ST 0,30 | 60 mm | 20 mm (manufacturer-stated) | 6,300 to 9,400 rpm (manufacturer-stated) | 12,500 rpm (manufacturer-stated) |
| 43469001 | POS TBU 75/M14 ST 0,30 | 75 mm | 25 mm (manufacturer-stated) | 6,300 to 9,400 rpm (manufacturer-stated) | 12,500 rpm (manufacturer-stated) |
| 43469102 | POS TBU 100/M14 ST 0,30 | 100 mm | 25 mm (manufacturer-stated) | 4,300 to 6,400 rpm (manufacturer-stated) | 8,500 rpm (manufacturer-stated) |
Each item number is a separate size. Speeds are shown for each item.
Selecting the right option
Check that the M14 x 2 thread matches your tool. Larger brushes can have lower speed limits, so read the speed columns in the table for the item you choose. The catalogue gives a recommended cutting speed of 15 to 45 m/s for cup brushes, depending on the application and below the maximum permitted speed (manufacturer-stated). Steel wire is rated not suitable for stainless steel, aluminium or non-ferrous metals (manufacturer-stated). Never exceed the maximum permitted speed marked on the brush, its label and in the catalogue (manufacturer-stated).
Related products
The same TBU cup brush in stainless steel wire: Pferd Crimped Cup Brush TBU, Stainless Steel Wire 0.30 mm, M14 Thread, 60, 75 and 100 mm.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
60 mm
Model Number: 43468902
-
75 mm
Model Number: 43469001
-
100 mm
Model Number: 43469102
