Pferd Drill Bit Set HSSG N Steel - 25203702

• Full ground drill bits with cross grinding.
• Diameter in mm: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0.

DIN 338 HSSG N STEEL Drill Bit Sets

• Includes a sturdy plastic box that protects the drills.
• Easy drill selection & storage.
• High-speed steel twist drill bits.
• Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium.
• Easy centring, long tool life & good chip removal.
• High-performance drilling tools in the STEEL in HSSG (M2) type for industrial uses.
• Fully ground, right-hand turning version with cross grinding.
• They are precision ground both in the chip flute and the guide chamfer as well as at the drill tip.
• They also have cross-grinding.
• These drills are suitable for highly precise positioning on workpieces and support centring during drilling.

Recommendations for use

• Observe the recommended rotational speed.
• When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible.
• This facilitates smooth running and extends the drill tool's life. Exception: when working on aluminium, use kerosene instead of cutting oil.
• In order to avoid corrosion, remove any particles which develop when working on stainless steel (INOX) from the workpiece.
• Clean the workpiece chemically or mechanically (etching/polishing, etc.).