Pferd pencil Brush PBU, 15 x 16mm

The Pferd PBU is a crimped pencil (end) brush. It has a 6mm shank and steel wire filament. The range has 2 options: 15 x 16mm and 20 x 22mm (brush diameter and cup diameter).

The PBU is suited to light brushing such as deburring, cleaning and derusting. Filament diameters are 0.35mm and 0.50mm. Optimum speed is 9,000 to 13,500rpm and maximum speed is 18,000rpm. Steel wire: high tensile and bending fatigue strength, temperature resistance up to 300°C. Key features: the wires spread out on rotation, which gives access to hard-to-reach areas such as drilled holes and cavities, creates fine surfaces.

Where this product is used

• Suited to light brushing such as deburring, cleaning and derusting
• Steel wire is highly suitable for steel and cast iron, and suitable for plastics
• Access to drilled holes and cavities

Features

• Brush diameter and cup diameter: 15 x 16mm and 20 x 22mm
• 6mm shank
• Steel wire (ST), filament diameters 0.35mm and 0.50mm
• Optimum speed 9,000 to 13,500rpm, maximum speed 18,000rpm
• The wires spread out on rotation, which gives access to hard-to-reach areas such as drilled holes and cavities
• Creates fine surfaces

Key specifications

Choosing the right option

Match the 6mm shank to your chuck or collet. The recommended cutting speed is 5 to 15 m/s for end brushes, depending on the application and below the maximum permitted speed. Steel wire is rated not suitable for stainless steel, aluminium or non-ferrous metals. Never exceed the maximum permitted speed marked on the brush, its label and .

The same POS item in stainless steel wire, and the wider PBU steel wire range: Pferd Pencil Brush PBU (POS), Stainless Steel Wire, 6mm Shank, 15 x 16 and 20 x 22mm, Pferd Pencil Brush PBU, Steel Wire, 6mm Shank, 10 x 10 to 30 x 29mm, 0.20 to 0.50mm.