Pferd POLICAP PCT cap holders, C / 13 x 17mm / 6mm

The Pferd POLICAP PCT holders carry POLICAP abrasive caps. It has 19 holders in four head shapes: cylindrical ZYA, cylindrical with radius end WRC, tapered conical with radius end WKG, and conical with radius end KEL. Head sizes run from 5 x 10mm to 21 x 40mm, on 3mm and 6mm shanks.

The abrasive caps are firmly held in place on the holder as the holder expands during use, and the tool is easy to change. Each holder is matched to the PC cap of the same shape and size, and the caps are ordered separately.

Where this product is used

• Mounting PC POLICAP abrasive caps in the matching shape and size
• Fine grinding with reusable holders and replaceable caps
• Mounting abrasive spiral bands on the KEL holder

Features

• Four head shapes: ZYA, WRC, WKG and KEL
• Head sizes 5 x 10mm to 21 x 40mm
• Shank diameters 3mm and 6mm
• Maximum speed set per size, from 20,000rpm to 95,000rpm
• Caps held firmly as the holder expands during use

Key specifications

Choosing the right option

Choose the holder with the same shape and head size as the cap. Check the shank diameter against your tool, and never exceed the maximum speed listed for the holder size.

Caps that fit these holders: Pferd POLICAP PC ZYA Abrasive Cap, Aluminium Oxide, Cylindrical, 5 x 10mm to 16 x 26mm, Grits 60 to 280, Pferd POLICAP PC WRC Abrasive Cap, Aluminium Oxide, Cylindrical with radius end, 5 x 11mm to 16 x 26mm, Grits 60 to 280, Pferd POLICAP PC WKG Abrasive Cap, Aluminium Oxide, Tapered conical with radius end, 5 x 11mm to 16 x 26mm, Grits 60 to 280.