M70 Variable Swivel Eye Snap Shackle, 316 Stainless Steel - SSVA4M70

Made in 316 (A4) stainless steel, the Snap Shackle Variable Swivel Eye is a quick-release shackle with a spring-loaded pin and a swivel eye, which turns so the line does not twist.

A4 (316) stainless steel contains molybdenum (about 2 to 3 per cent), which improves its resistance to chlorides. It is the grade normally chosen for coastal, pool, marine and food-processing settings, and it costs more than A2 (304).

This listing has 3 variants covering sizes M70 to M135. Variants are supplied in packs of 2 to 5, depending on size.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Shade sail and awning tie-offs
• Chemical and washdown areas
• Sails, flags and halyards
• Quick-release rope and line connections
• Boat, jetty and waterfront structures

Features

• Swivel eye turns to prevent twisting
• Supplied in packs of 2 to 5
• Range covers M70 to M135 in 3 variants
• Spring-loaded pin for quick release
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings

Key specifications

Selecting the right option

Pick the shackle by the size shown on the variant. Check that the release cannot be opened accidentally by the line movement in your use.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.