Stahlwille SW2054/5 INHEX Socket, 5 mm, 1/2" Drive, 120 mm Long

The Stahlwille 2054 is a range of extra long metric INHEX sockets for 1/2" drive in 4 sizes: 5, 6 and 7 mm at 120 mm long, and 14 mm at 140 mm long, for hexagon socket head screws. The datasheets print DIN 7422 (manufacturer-stated).

Stahlwille describes these as the extra long (extra lang) version. The sockets are Chrome Alloy Steel, chrome-plated. The square drive is internal, so the socket fits a 1/2" drive ratchet, handle or extension. The datasheets print no torque rating and no striking or extension instruction; they are for hand use.

Where this product is used

• 5, 6, 7 and 14 mm hexagon socket head screws set deep in a housing or recess
• Reaching past a raised edge where a standard 60 mm socket will not clear
• Toolkits with a 1/2" drive ratchet that need extra reach

Features

• Extra long INHEX sockets for 1/2" drive (manufacturer-stated)
• 5, 6 and 7 mm at 120 mm long, 14 mm at 140 mm long (manufacturer-stated)
• 1/2" internal square drive (manufacturer-stated)
• Chrome Alloy Steel, chrome-plated (manufacturer-stated)
• Listed to DIN 7422 (manufacturer-stated)

Common specifications

Key specifications

A dash means the figure is not published on this page. Lengths and weights are manufacturer-stated.

Selecting the right option

Pick the hex size by the hexagon socket in the screw head. For the standard 60 mm length see the Stahlwille 54 INHEX sockets, and for other long lengths and sizes the Stahlwille 1054 long INHEX sockets. The SWVP1054/4 extra long INHEX socket value pack (1/2" drive) gives four long sizes in one pack. Turn them with a 512 1/2" drive reversible ratchet.

Related products

Related Stahlwille products: SWVP1054/4 extra long INHEX socket value pack (1/2" drive), 512 1/2" drive reversible ratchet, 509 1/2" drive extension bars, 504 1/2" drive flexible handle and 510 1/2" drive universal joint.