Stahlwille SW1054TX T30 Extra Long Torx Screwdriver Socket, 1/2" Drive, 120 mm Long

The Stahlwille 1054TX and 2054TX are extra long Torx screwdriver sockets for 1/2" drive: 9 variants from T30 to T70, with lengths from 107 to 140 mm, for internal Torx screws. The socket has a Torx tip at one end and a 1/2" internal square drive at the other, so it turns on a 1/2" drive ratchet, handle or extension. The sockets are Chrome Alloy Steel, chrome plated (manufacturer-stated).

The range is seven 1054TX sockets (T30 to T70) and two 2054TX sockets (T40 and T45, 140 mm). The T40 and T45 are offered in both: 120 mm as the 1054TX and 140 mm as the 2054TX, so check the model and length on each variant against the access you need. The tip number is the Torx size, so match it to the recess in the screw head. Stahlwille's datasheets mark these sockets for hand use and print no torque rating and no striking instruction, so keep to hand-driven work. Weights are shown only for the sizes where Stahlwille's datasheet and 2017 brochure agree, and are a dash elsewhere.

Where this product is used

• Internal Torx screws from T30 to T70 set deep in a recess
• Screws behind flanges, brackets and housings that a standard-length bit socket cannot reach
• Machinery, vehicle and engine work with larger Torx screws

Features

• 9 variants from T30 to T70 (manufacturer-stated)
• Lengths from 107 to 140 mm (manufacturer-stated)
• 1/2" internal square drive (manufacturer-stated)
• Chrome Alloy Steel, chrome plated (manufacturer-stated)
• For hand use (manufacturer-stated)

Common specifications

Key specifications

A dash means the figure is not published on this page. Length and weights are manufacturer-stated; weights are shown only where the datasheet and the 2017 brochure agree.

Selecting the right option

Pick the tip by the Torx recess in the screw head and the length by the access you need. For standard-length sockets see the 54TX Torx screwdriver sockets, 1/2" drive, or the 54TX/9 Torx screwdriver socket set, 1/2" drive for all nine tips in one pack. Turn them with a 512 1/2" drive reversible ratchet; the 509 1/2" drive extension bars add reach and the 510 1/2" drive universal joint lets you work at an angle. For long INHEX sockets on the same drive see the long INHEX sockets, 1/2" drive.

Related products

Related Stahlwille products: 54TX Torx screwdriver sockets, 1/2" drive, 54TX/9 Torx screwdriver socket set, 1/2" drive, 512 1/2" drive reversible ratchet, 509 1/2" drive extension bars, 504 1/2" drive flexible handle and long INHEX sockets, 1/2" drive.