Buy Chain & Sprockets Online in Australia
Roller Chain Pitch Reference — Quick Reference
Roller chain selection turns on standard (BS / ASA), pitch (distance between roller centres), configuration (simplex / duplex / triplex), and matching sprocket. BS chains are dominant in Australian industrial plant; ASA is common in US-imported and agricultural equipment. Mismatched chain ↔ sprocket = rapid wear.
| Standard | Designation | Pitch | Typical Use |
|---|---|---|---|
| BS (British Standard) | 06B | 9.525 mm (3/8") | Light industrial, motorcycles, packaging |
| BS | 08B | 12.7 mm (1/2") | General industrial — most common workshop pitch |
| BS | 10B | 15.875 mm (5/8") | Medium-duty conveyors, machine drives |
| BS | 12B | 19.05 mm (3/4") | Heavy-duty industrial drives |
| BS | 16B / 20B / 24B | 25.4 / 31.75 / 38.1 mm (1" / 1-1/4" / 1-1/2") | Heavy machinery, large conveyors |
| ASA (American Standard) | #40 | 12.7 mm (1/2") | US-import equipment — same pitch as 08B but different plate width |
| ASA | #50 | 15.875 mm (5/8") | US/agricultural |
| ASA | #60 / #80 / #100 | 19.05 / 25.4 / 31.75 mm (3/4" / 1" / 1-1/4") | Heavy US-spec drives |
Critical: BS and ASA chains with the same pitch (e.g. 08B vs #40) are NOT interchangeable — different inner plate widths and roller diameters. Match sprocket teeth count to drive ratio + minimum 17T to reduce polygon effect. Use simplex for light drives, duplex/triplex where torque or shock load demands. Brands: KCM, SY Chain, Tsubaki. Companion: roller chain, sprockets, connecting links, taper lock bushes, roller chain guide.
Roller Chain & Sprockets: BS, ASA Drive Chain, Connecting Links and Taper Lock Sprockets
Roller chain and sprocket drives are among the most reliable power transmission solutions in industrial use — delivering high efficiency, positive drive, and long service life when correctly selected and maintained. AIMS Industrial supplies hundreds of chain and sprocket products from KCM, SY & Tsubaki, including British Standard (BS) and American Standard (ASA) simplex, duplex & triplex roller chain, pilot bore sprockets, taper lock sprockets, weld-fit sprockets, connecting links, and tensioner idlers.
The AIMS Chain & Sprockets Range
Our range covers both BS (most common in industrial Australian plant) and ASA (common in imported US equipment & agricultural equipment) drive systems.
- KCM BS Roller Chain (Simplex/Duplex/Triplex): British Standard (BS) simplex roller chain is the dominant chain standard in Australian industrial plant. KCM BS roller chain is available in standard simplex or multiple strand with connecting links, offset/half (crank) links, and full box quantities for maintenance and replacement applications.
- KCM ASA Roller Chain (Simplex/Duplex/Triplex): American Standard (ASA/ANSI) roller chain for imported US-specification equipment and machinery. Available in connecting link and full-box configurations.
- Pilot Bore Sprockets (BS & ASA): BS and ASA pilot bore sprockets in simplex, duplex & triplex strand configurations allow custom bore and keyway machining to suit your specific shaft dimensions. Hardened tooth for abrasive and high-cycle applications.
- Taper Lock Sprockets: BS taper lock sprockets accept standard taper lock bushes for rapid shaft mounting and demounting without shaft machining — the preferred configuration for maintenance-friendly drive system design.
- Weld-Fit Sprockets: BS and ANSI weld-fit sprockets with hardened teeth for permanent shaft welding in drives where taper lock or pilot bore is impractical. Common in conveyor and agricultural applications.
- Tensioner Idler Sprockets: Tensioner idler sprockets maintain correct chain tension across the span, extending chain and sprocket life and preventing jump-off under variable loads.
Chain Drive Maintenance & Selection
- Chain Matching: Chain sizes are identified by pitch: 06B/ASA35 (3/8"), 08B/ASA40 (1/2"), 10B/ASA50 (5/8"), 12B/ASA60 (3/4"), 16B/ASA80 (1"), 20B/ASA100 (1-1/4"). Always replace chain and sprockets together when either shows wear — mixing new chain with worn sprockets accelerates re-wear of the new chain.Note that even though BS & ASA chain have the same pitch, other dimensions differ slightly, so it is important to find chain/sprocket identifying markings or measure multiple dimensions carefully.
- Lubrication is Critical: Unlubricated roller chain can lose 30-50% of its theoretical service life. See our lubrication range for chain oils and lubricants appropriate for your operating temperature and environment.
- Expert Support: Need help selecting the right chain pitch, strand count, or sprocket bore for your drive? Contact our team or request a quote for drive system specification support.
- Australian Business, Local Supply: As a proudly Australian business since 1988, we stock locally and work with trusted local Australian manufacturers and distributors to ensure fast, reliable supply.
Also see our sprockets, industrial V belts, V pulleys, and bearings and bushings for complementary power transmission components.