Buy Remote Control Online in Australia
Industrial Remote Control Selection — Quick Reference
Industrial remote control systems let operators run cranes + hoists + conveyors + material handling equipment from SAFE DISTANCE — keeping workers out of the load path + improving operator visibility of the lift. Selection by application + range + control complexity.
| Remote Control Type | Best For | Range |
|---|---|---|
| Pendant Control (Wired) | Cranes + hoists with operator close to load | 2-10m cable |
| Wireless Radio Remote (Industrial) | Cranes + hoists — operator at safe distance from load | 50-300m typical |
| Wireless Belly-Box / Belly-Pack | Worn by operator — hands-free + free movement | 50-300m |
| Wireless Joystick Controller | Precision crane + hoist positioning | 50-200m |
| Wireless Push-Button Controller | Simple up/down + left/right — basic hoist + lift | 50-200m |
| Wireless Conveyor Remote | Material conveyor start/stop + speed | 50-150m |
| Receiver Unit (Crane-Side) | Replaces existing pendant control on legacy cranes | Retrofit option |
| Spare Battery + Charger | Production crane uptime — keep spare ready | Per remote unit |
| Replacement Antenna + Cable | Failed antenna replacement | Per system |
Critical: Industrial wireless remote control complies with frequency licensing (typically 433 MHz or 2.4 GHz industrial band). E-STOP button MUST be present + functional. Pair receiver to ONE transmitter at a time — prevents accidental cross-control of multiple cranes. Inspect cable + connector daily on pendant controls (wear point). Companion: hoists, cranes, lifting equipment.
Industrial Remote Control Systems for Cranes and Lifting Equipment
Industrial remote control systems let operators run cranes, hoists, conveyors, and material handling equipment from a safe distance — keeping workers out of the load path and improving operator visibility of the lift. AIMS Industrial supplies remote control systems and components to trade customers across Australian industry, with the JUUKO range covering most workshop and crane applications.
The remote control categories we stock
- Radio remote controls for cranes — multi-function transmitters and receivers for overhead crane operation
- Hoist remote controls — pendant and radio remotes for chain blocks, electric hoists, and lever hoists
- Conveyor and process remote controls — for remote start/stop and speed control of material handling equipment
- Replacement transmitters and receivers — to keep existing systems in service
- Antennas, batteries, and accessories — for remote control system maintenance
Why specify a remote control
- Operator safety — keeping the operator out from under the load is the simplest fall-of-load mitigation
- Better visibility of the lift — the operator can position to see the load, hooks, and slings clearly
- Faster cycle times — no need to walk back to a fixed pendant station between picks
- Reduced cable damage — radio replaces the trailing pendant cable that gets snagged and damaged
- Multi-zone operation — operators can move freely while keeping control of the equipment
JUUKO at AIMS
JUUKO is a long-established brand of radio remote control systems for industrial lifting and material handling equipment. The JUUKO range covers transmitters, receivers, and complete systems matched to the crane and hoist installations Australian workshops actually run. Frequency and channel licensing for industrial radio remotes follows ACMA regulations — JUUKO equipment is supplied compliant with Australian regulatory requirements.
Compliance and standards
Radio remote controls used on lifting equipment must comply with AS 1418 (cranes, hoists, and winches) and AS 2550 (cranes — safe use), in addition to ACMA radio frequency regulations. Each system must be commissioned by a competent person and integrated with the lifting equipment's safety systems (emergency stop, overload protection, lift-limit cutoffs). Don't fit a remote control to existing lifting equipment without a competent commissioning process.
Companion ranges at AIMS
Remote control systems sit alongside our broader lifting equipment range — see electric chain hoists, Pacific Hoists, lifting shackles, and rigging and lifting slings for the related lifting hardware.
Need help speccing a remote control system for an existing crane or new installation? contact our team — we'll work through the lifting equipment, control functions needed, and compliance requirements.
People Also Ask — Remote Control
Q: What's the difference between a pendant control and a wireless radio remote?
A pendant control is a wired unit on a 2-10m cable, suited to cranes and hoists where the operator works close to the load. A wireless radio remote lets the operator work from a safe distance — typically 50-300m — improving visibility of the lift and keeping the operator out of the load path. Wireless also eliminates the cable damage and snagging that pendant systems are prone to over time.
Q: Does an industrial wireless remote need an E-stop button?
Yes — an E-stop (emergency stop) button must be present and functional on any industrial wireless remote control system. This is a non-negotiable safety requirement for crane, hoist and conveyor remote controls, ensuring the operator can immediately halt equipment movement regardless of what function is currently selected.
Q: Can one receiver be paired to multiple transmitters?
No — a receiver should be paired to only one transmitter at a time. This prevents accidental cross-control, where a second transmitter in the workplace could unintentionally operate a crane or hoist it isn't meant to control. Correct pairing discipline is part of safe commissioning for any multi-crane workshop or site.
Q: What standards apply to radio remote controls on cranes and hoists in Australia?
Radio remote controls fitted to lifting equipment must comply with AS 1418 (cranes, hoists and winches) and AS 2550 (cranes — safe use), in addition to ACMA radio frequency licensing requirements. Each installation must be commissioned by a competent person and properly integrated with the equipment's existing safety systems — emergency stop, overload protection and lift-limit cutoffs.
Q: Can I retrofit a radio remote to an existing crane with a wired pendant?
Yes — a crane-side receiver unit can replace an existing pendant control on legacy cranes, converting a wired system to wireless radio remote operation. This is a common retrofit for older cranes still running factory-fitted pendant stations. As with any remote control installation, it must be commissioned by a competent person and integrated with the crane's safety systems.
Q: How often should I inspect a pendant control cable?
Daily — the cable and connector on a wired pendant control are wear points subject to flexing, snagging and abrasion during normal use. Regular inspection catches fraying, damaged insulation or loose connectors before they become a safety issue or cause unreliable crane operation.