Buy Magswitch Magnetic Holders Online in Australia
Magswitch Magnetic Holder Selection — Quick Reference
Magswitch = SWITCHABLE PERMANENT magnets — turned ON / OFF by hand lever. WELDING + FABRICATION fixturing + workshop holding. Different from electromagnetic — no power needed + permanent magnet inside switches via mechanical action.
| Magswitch Product | Best For |
|---|---|
| Magswitch Welding Magnet (Square) | Workpiece holding for welding — 90° angle |
| Magswitch Multi-Angle | Variable angle setup |
| Magswitch Lifting Magnet | Sheet + plate lifting |
| Magswitch Drill Press Magnet | Workshop drilling fixturing |
| Magswitch Welding Earth (Switchable) | Welder earth attachment |
| Common Holding Forces (40-1000 kg) | Match to load + safety factor |
Critical: Match HOLDING FORCE to LOAD × SAFETY FACTOR. Switch must FULLY ENGAGE (audible click) — partial engagement = reduced force. Surface CLEAN + dry + ferrous. Brand: Magswitch. Companion: magnets, lifting magnets, welding.
Magswitch Magnetic Holders for Welding and Fabrication
Magswitch manufactures switchable permanent magnets that can be turned on and off by rotating a knob — providing the strong clamping force of a permanent magnet with the release convenience of an electromagnet, without requiring any electrical power. Once switched on, the magnet holds its full rated force indefinitely without power consumption or heat generation. Switching off releases the workpiece cleanly. AIMS Industrial stocks Magswitch magnetic holders for welding, fabrication, material handling, and positioning applications in Australian workshops and manufacturing facilities.
How Magswitch Technology Works
Conventional permanent magnets cannot be turned off — the magnetic field is always active. Electromagnets can be switched but require continuous electrical power and generate heat. Magswitch technology uses a rotating internal magnet assembly that aligns the magnetic field through the working face (on position) or cancels it by directing the field internally (off position). The result is a true on-off permanent magnet that holds its state without power, generates no heat, and provides the full rated holding force when switched on. The rotating knob mechanism is simple and reliable, with no electronic components to fail in a workshop environment.
Welding and Fabrication Positioning
In welding and fabrication, Magswitch holders are used to position and hold components while tack welds are applied, to hold steel sections against fixtures and jigs, and to suspend or support parts during assembly. The ability to switch off cleanly makes repositioning fast and safe — there is no need to pry a permanent magnet off a steel surface or manage the awkward handling of a component that is reluctant to release. For repetitive positioning tasks in production fabrication, the speed of Magswitch positioning and release provides a genuine productivity advantage over mechanical clamping approaches.
Material Handling Applications
Magswitch holders are used as lifting and handling devices for steel plate, bar stock, and fabricated components — attaching to the workpiece face for lifting or positioning without the need for lifting slings, straps, or hooks. The on-off switching allows the magnet to be applied to the workpiece in the pick position, the component moved, and the magnet released cleanly at the destination. Magswitch lifting magnets are rated for specific working load limits and must be selected to match the weight and geometry of the components being handled. Never exceed the rated WLL of a Magswitch device in any lifting application.
Selecting the Right Magswitch Product
Magswitch magnetic holders are available in a range of holding forces, sizes, and configurations — from small bench-top holders for welding positioning through to larger material handling magnets for steel plate operations. For Magswitch product selection, holding force specifications, or advice on integrating switchable magnets into your fabrication or handling operations, contact our team at AIMS Industrial.
People Also Ask — Magswitch Magnetic Holders
Q: How does a Magswitch magnetic holder turn off if it's a permanent magnet?
A rotating internal magnet assembly aligns the magnetic field through the working face when switched on, and cancels it by directing the field internally when switched off. That gives a true on-off permanent magnet — full rated holding force with no power and no heat, and a clean release when switched off.
Q: How do I know if a Magswitch holder is properly engaged?
The switch must fully engage — listen for the audible click. Partial engagement gives reduced holding force, so don't assume it's on just because the lever has moved; confirm the click.
Q: What surface conditions does a Magswitch holder need to work properly?
The surface needs to be clean, dry and ferrous (magnetic steel) — contamination or a non-ferrous surface will reduce or eliminate the holding force.
Q: Can I use a Magswitch lifting magnet for any weight as long as it looks strong enough?
No — Magswitch lifting magnets are rated for specific working load limits, and you must select one to match the weight and geometry of the components being handled. Never exceed the rated WLL in any lifting application.