Buy All Thread Rod Online in Australia
All Thread Rod covers 52 listings of allthread (threaded rod or studding) in steel, stainless, brass and nylon, from Hobson, Bremick, Inox World and Bumax. The range runs across metric, UNC, UNF, BSW, BSF and BA threads, with plain, zinc, hot dip galvanised and stainless finishes, and some left hand rod. Each listing carries several diameters, which you select on the product page.
What's in the range
| Type | Listings | What's there |
|---|---|---|
| Metric Class 4.6 steel | 10 | Hobson Class 4.6 allthread in plain, zinc plated and hot dip galvanised (plus a left hand plain rod), Hobson and Bremick G4.6 in plain, zinc and galvanised, Hobson metric fine Class 4.6 plain, and an M16 zinc plated 600 mm pack of 10. |
| Metric high tensile steel | 8 | Hobson Sampsonrod Class 8.8 (plain, hot dip galvanised, zinc yellow passivate), Sampsonrod metric fine Class 8.8 (plain, hot dip galvanised), Grade 8.8 plain (Bremick) and galvanised (Hobson), and Hobrod Class 10.9 plain. |
| UNC and UNF steel | 10 | Bremick UNC Grade 1 and Grade 2 plain, Hobson UNC Grade 1 plain, Hobson UNF Grade 1 (plain and black) and Grade 5 plain, Hobrod UNC Grade 8 plain, and Sampsonrod UNC Grade 5 in plain and hot dip galvanised. |
| BSW, BSF and BA steel | 11 | BSW in plain, mild steel plain and zinc plated (including two left hand listings), BSW G2 in plain (Hobson) and zinc (Bremick), a BSW zinc plated stud, BSF plain and mild steel plain, and BA plain. |
| Stainless steel | 9 | Inox World 304 and 316 in metric, UNC and BSW, an A4 metric fine 316 rod, an A4-80 high tensile 316 rod, and Bumax stainless high tensile. |
| Brass and nylon | 4 | Hobson brass allthread (two listings, including BSW) and nylon allthread (two listings, including UNC natural nylon). |
Choosing allthread
Start with the thread system of the nut or tapped hole it has to match: metric, UNC or UNF, or BSW, BSF or BA. Then choose the strength and the finish. Class 4.6 is the general purpose steel rod, while Class 8.8 and 10.9 are high tensile. Plain rod suits indoor and protected use, zinc and hot dip galvanised steel add corrosion protection, and stainless gives the most corrosion resistance, with 316 (A4) the higher grade of the two stainless options. Match the nut and washer to the strength of the rod, and for structural or overhead use work from an engineer's specification rather than a catalogue. Our Threaded Rod Guide covers sizes and grades in more detail. Always check the data sheet.
Related ranges
Nuts, Hex Nuts and Washers to finish the rod, Hex Bolts & Nuts, Hex Bolts, Anchors and Fasteners.
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right rod, size and finish to your job.
All Thread Rod FAQs
What is the difference between Class 4.6 and Class 8.8 allthread?
Class 4.6 is the general purpose steel rod. Class 8.8 and 10.9 are high tensile. We list Hobson Sampsonrod and Bremick rod in 8.8 and Hobrod in 10.9. Match the nut and washer to the rod, and check the data sheet for the strength you need.
Should I choose galvanised or stainless allthread?
Hot dip galvanised steel allthread is listed in Class 4.6 and 8.8, and stainless is listed in 304 and 316 (A4). Stainless is the more corrosion resistant option, and 316 is the higher grade of the two. Choose by the environment the rod will sit in, or call us and we'll help.
Do you have imperial and left hand allthread?
Yes. Imperial rod is listed in UNC, UNF, BSW, BSF and BA in steel, with stainless in UNC and BSW. Left hand rod is listed in Class 4.6 metric and in BSW. Select the thread form and size on the product page.