AAP Brass Y Strainer, 3/8"

This AAP brass Y strainer has a brass body, a 304 stainless steel mesh and female threaded ends. It is supplied in 8 sizes from 3/8" (10mm) to 2-1/2" (65mm).

A Y strainer is fitted in line to protect control equipment, instruments, pumps and regulators. Fluid passes through a perforated stainless steel or wire mesh basket held in a Y shaped body. The basket traps fines and solids, which fall into the leg of the body. The leg can be flushed out while the plant is running if a ball valve is fitted to it, or the basket can be taken out for cleaning when the plant is shut down. The maximum working temperature is 100°C and the cold working pressure is 1,600 kPa (16 bar), with a thread to AS 1722.2.

Where this product is used

• Protecting inline valves from solids
• Protecting pumps, regulators and instruments
• Water and general services pipework in brass
• Small bore lines where a screwed strainer is needed

Features

• 8 sizes from 3/8" (10mm) to 2-1/2" (65mm)
• Brass body with a 304 stainless steel mesh
• Thread to AS 1722.2
• Cold working pressure 1,600 kPa (16 bar), maximum 100°C
• Protects inline valves, pumps and instruments
• Fine mesh, 0.8mm at 1mm centres

Key specifications

Choosing the right option

Choose the size to match your pipe thread.

Related AAP products: AAP Stainless Steel Y Strainer, Screwed, 316 Mesh, AAP Cast Iron Y Strainer, Flanged, Table E, AAP Cast Iron Y Strainer, Flanged, Table D, AAP Stainless Mesh Filter, Nylon Body, ISO 228 Thread.