AAP Roll Groove Mechanical Tee, 3" x 2"

This AAP roll groove mechanical tee is the BSP version, in ductile iron, for pipe with a hole cut in the run. It is supplied in 4 sizes, 3 x 2" (80 x 50mm) to 6 x 3" (150 x 80mm). A mechanical tee clamps onto a pipe over a hole cut in the run and gives a branch outlet without cutting in a tee. The two housings are tightened with the bolts for each size. A is the overall length, B the height and C the housing width.

The roll groove fittings are made in ductile iron to ASTM A536 Grade 65-45-12. The working pressure is 1600 kPa and the maximum working temperature is 100 °C. Working pressures may also be limited by pressure piping codes or industry regulations.

Where this product is used

• Taking a branch off an existing pipe run
• Adding a branch outlet without cutting in a tee
• Services within the rated pressure and temperature

Features

• 4 sizes, 3 x 2" (80 x 50mm) to 6 x 3" (150 x 80mm)
• Ductile iron, ASTM A536 Grade 65-45-12
• Branch outlet without cutting in a tee
• Working pressure 1600 kPa

Key specifications

Choosing the right option

Choose the run size to match your pipe outside diameter, then the outlet size you need.

Related AAP products: AAP Roll Groove Mechanical Tee, AAP Roll Groove Rigid Coupling, Painted, AAP Roll Groove Equal Tee, Painted, AAP Roll Groove 90 Degree Elbow, Painted.