Abbott & Ashby Crimped wire wheels for 150mm and 200mm

Abbott & Ashby crimped wire wheels made of crimped brass coated carbon steel wire, in two sizes: AAWB/150 at 150mm (6") diameter and 22mm wide with a 12.7mm bore, and AAWB/200 at 200mm (8") diameter and 25mm (1") wide with a 15.9mm bore.

The crimped wire is highly flexible on irregular surfaces and suits light brushing, surface preparation, general purpose cleaning and deburring. Its cutting action is at the filament tips, which supports consistent, uniform brushing.

Where this product is used

• Light brushing and surface preparation
• General purpose cleaning and deburring
• Brushing irregular surfaces

Features

• Crimped brass coated carbon steel wire
• Flexible on irregular surfaces
• Light pressure gives the fastest brushing action and longest brush life, excessive pressure over-bends filaments and causes breakage, rapid dulling and reduced brush life
• Reverse the wheel periodically to use the opposite cutting edge of the filament

Key specifications

Choosing the right option

The two wheels differ in diameter, width and bore: AAWB/150 (150mm, 22mm wide) is for 150mm bench grinders and AAWB/200 (200mm, 25mm wide) for 200mm bench grinders. Apply light pressure and reverse the wheel from time to time. For grinding rather than brushing, see the silicon carbide grinding wheels linked below.

See also: Abbott & Ashby Silicon Carbide Grinding Wheel, Abbott & Ashby 6" Industrial Bench Grinder, 280W, Abbott & Ashby 8" Industrial Bench Grinder, 600W, Abbott & Ashby 8" Industrial Bench Grinder With Wire Wheel, 600W.