Hobson ASMSGCM120110 M12 x 110mm Allthread Rod, Class 4.6 UTS, Hot Dip Galvanised

The Hobson allthread rod is fully threaded along its length (metric thread, hot dip galvanised finish), supplied as 110mm to 600mm cut lengths. This page lists 5 items: M12 and M16, 110 to 600mm.

Hobson lists class 4.6 as low tensile carbon steel, and its class and grade chart pairs class 4.6 with imperial grade 2 (manufacturer-stated).

The supplier names these rods Class 4.6 UTS. The Hobson acronym list includes UTS as a tensile strength abbreviation (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated).

Pack quantity is shown for each item in the table: Pack of 10, Pack of 100 and Pack of 50.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 5 sizes: M12 and M16, 110 to 600mm
• Metric thread, fully threaded along its length
• Hot dip galvanised finish
• Supplied as 110mm to 600mm cut lengths
• Class 4.6 UTS strength level

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch in the table with your nut. The length is part of the item, so choose size and length together. For a different strength level see Hobson Sampsonrod, Class 8.8, Plain, M6 to M52, 1m.

Related products

Related rods: Hobson Brass Allthread Rod, M3 to M24, 1m, Hobson Allthread Rod, Class 4.6 UTS, Hot Dip Galvanised, M8 to M64, 1m and Hobson Allthread Rod, Class 4.6 UTS, Plain, M6 to M56, 1m.