Hobson ASMSPFM101000 M10 x 1.25mm Metric Fine Allthread Rod, Class 4.6 UTS, Plain, 1m

The Hobson metric fine allthread rod is fully threaded along its length (metric fine pitch thread, plain finish), supplied in 1m lengths. This page lists 4 items: M10 x 1.25mm to M20 x 1.5mm.

Hobson lists class 4.6 as low tensile carbon steel, and its class and grade chart pairs class 4.6 with imperial grade 2 (manufacturer-stated).

The supplier names these rods Class 4.6 UTS. The Hobson acronym list includes UTS as a tensile strength abbreviation (manufacturer-stated).

Each size name includes its thread pitch, so match the pitch of your nut as well as the diameter. The Hobson thread table lists fine and extra-fine pitches for these diameters (manufacturer-stated).

Each item is a single length.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 4 sizes: M10 x 1.25mm to M20 x 1.5mm
• Metric fine pitch thread, fully threaded along its length
• Plain finish
• Supplied in 1m lengths
• Class 4.6 UTS strength level

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. The thread pitch is part of the size name, so check it as well as the diameter. The length shown is the full length of the rod; it can be cut to suit. For a different strength level see Hobson Sampsonrod, Class 8.8, Plain, M6 to M52, 1m.

Related products

Related rods: Hobson M16 Allthread Rod, Class 4.6 UTS, Zinc Plated, 600mm, Pack of 10, Hobson Allthread Rod, Class 4.6 UTS, Hot Dip Galvanised, M12 and M16, 110 to 600mm Lengths and Hobson Brass Allthread Rod, M3 to M24, 1m.