Seagull Oil Seal Ford & Holden Marine 1.437 x 2.328 x 0.590" (PR6693)

Seagull automotive oil seals in 3 imperial sizes, listed for Ford and Holden marine applications (see the option list for each part number).

Each is a rotary shaft seal that keeps lubricant in and contamination out. Compare the dimensions with the seal being replaced before ordering.

Where this product is used

• Marine and automotive seal replacement on the applications listed
• Workshop and fleet maintenance where the original seal has worn or leaked

Features

• Listed for Ford and Holden marine applications
• Three imperial sizes with part numbers PR6693, PR6641 and PR6692

Key specifications

Available sizes

Selecting the right option

Compare the shaft diameter, housing bore and width with the seal being replaced. For a size not shown, request a quote with the shaft diameter, housing bore and width.

Fitting and use

Fit the seal with the main lip facing the fluid you are keeping in, press it in square using a tool that bears on the outer face of the seal, and avoid hammering directly on the seal.

Lubricate the lip with the system oil or grease before assembly, and cover keyways, splines, threads or sharp shoulders with a sleeve or tape so they cannot cut the lip as it passes over.

Run the seal on a clean, smooth shaft with a lead-in chamfer and no burrs. A shaft finished to ISO h11 is the usual guide for rotary shaft seals.

Related products

See the full Seagull range in Oil Seals & O-Rings.