B-Safe Attachment Strap, 1.5 m, 25 mm Webbing, Continuous Sewn Loop

B-Safe attachment strap, code BP03101.5, is a 1.5m continuous sewn loop in 25mm black webbing, used to tie off around an anchor point so fall prevention or fall arrest equipment can be attached. It is a temporary anchor for one person and uses it in the [Tradie Roofers Kit](/products/b-safe-tradie-roofers-kit).

B-Safe's documents differ on the rating. Fall protection equipment must be selected, installed, used, inspected and maintained by trained people in line with the instructions supplied with it and the relevant Australian Standards.

Where this product is used

• Temporary anchorage connection, tied off around a suitable anchor point, for fall arrest equipment for one person
• Connecting the rope line in a roofers kit to an anchor point

Features

• 1.5m continuous sewn loop
• 25mm wide high capacity black webbing
• High strength stitching
• 100% visually inspected and batch tested

Key specifications

Choosing the right option

Choose an anchor point that can take the load, and see B-Safe's technical guide figure of 15kN for one person for free fall arrest. Connect it to a full body harness that has a fall arrest attachment point, and to an anchorage that can take the load. An anchorage for free fall arrest must withstand a minimum of 15kN for one person and 21kN for two.

See also: roof anchor T-bar, suspension trauma straps, shock absorbing lanyard.