Beaver Hook and Eye Commercial Turnbuckle, 6 mm (323206) - Not for Lifting

Beaver hook and eye commercial turnbuckles are forged steel turnbuckles with a Hot dipped galvanised finish, for straight, in-line tension, generally used with wire rope and chain assemblies (manufacturer-stated). Beaver states they are not to be used for lifting applications. This listing carries 5 sizes, 6 to 16 mm. Beaver's range also lists 20, 22 and 25 mm (323220, 323223, 323225).

Beaver says its commercial rigging hardware is intended for non-lifting applications, such as guying and rigging of fences and pillars, and is available in hot dipped galvanised and electro plated finishes (manufacturer-stated). Beaver publishes no working load limit or standard for these turnbuckles. Beaver lists size and dimensions with a tolerance of plus or minus 10%.

Where this product is used

• Guying and rigging of fences, pillars and similar non-lifting work, as Beaver describes its commercial rigging hardware; Beaver states these turnbuckles are not to be used for lifting (manufacturer-stated)

Features

• Hook and eye end fittings, forged steel (manufacturer-stated)
• Hot dipped galvanised finish for protection against rust and corrosion (manufacturer-stated)
• Not to be used for lifting applications (manufacturer-stated)
• 5 sizes in this listing, 6 to 16 mm (manufacturer-stated)
• Weight and Beaver pack quantity listed for each size, with dimensions (manufacturer-stated)

Not for lifting

This product is not rated for lifting. Do not use it to lift or suspend loads. For lifting applications use a rated lifting product marked with a working load limit (WLL). Beaver states these turnbuckles are not to be used for lifting applications.

Key specifications

Codes, sizes, dimensions (in millimetres), weights and pack quantities are from Beaver's Materials Handling Technical Manual (Vol. 4) and the Beaver website. Beaver does not define the dimension letters. Beaver lists size and dimensions with a tolerance of plus or minus 10%. Beaver sells the turnbuckles singly (unit of measure: each).

Selecting the right option

Choose the size and end fittings to suit your non-lifting application. Beaver does not define the size figure, which for turnbuckles is normally the thread diameter. For any lifting application use a rated lifting product marked with a working load limit (WLL).

Related products

Related Beaver turnbuckles and rigging screws: jaw and jaw rigging screws with locknuts, super buckles jaw and jaw with lock nuts, jaw/eye super turnbuckle 12 mm, eye and eye commercial turnbuckles (galvanised), hook and eye commercial turnbuckles (electro plated). Wire rope and fittings: G2070 7 x 7 wire rope, G1770 6 x 36 wire rope, galvanised wire rope grips, hot dipped galvanised wire rope thimbles and aluminium wire rope ferrules. Check each fitting is rated and sized for the job before you order.