Beaver jaw and jaw super buckle turnbuckles, 12 x 305mm

Beaver super buckles are rated jaw and jaw turnbuckles with lock nuts for straight, in-line tensioning with wire rope and chain assemblies. No Australian Standard for it.

The these turnbuckles are made from Grade P high tensile steel, quenched. They match a 12mm (1/2") diameter and a 305mm (12") length.

Where this product is used

• Tensioning wire rope and chain assemblies
• Straight in-line tensioning

Features

• Jaw and jaw end fittings with lock nuts
• Working load limit for each size, from 1 t to 4.54 t
• Federal Specification FF-T-791
• Grade P high tensile steel, quenched and tempered, forged and hot dip galvanised
• Five imperial sizes, with dimensions, weight and pack quantity for each

Key specifications

Choosing the right option

Its rated rigging hardware has a working load limit (WLL) and is rated for lifting applications, and the rated load depends on the end fittings and thread. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

Beaver sells the super buckles singly (unit of measure: each).

Choose the size by the working load limit your application needs, then check the dimensions and the end fittings against your rigging.

Related Beaver turnbuckles and rigging screws: Beaver Jaw and Jaw Rigging Screws with Locknuts, Hot Dipped Galvanised, jaw/eye super turnbuckle 12mm, Beaver Hook and Eye Commercial Turnbuckles, Hot Dipped Galvanised - Not for Lifting, Beaver Eye and Eye Commercial Turnbuckles, Hot Dipped Galvanised - Not for Lifting.

Wire rope and fittings: Beaver G2070 7 x 7 Galvanised Wire Rope, Beaver G1770 6 x 36 Galvanised Wire Rope, Beaver Galvanised Wire Rope Grips - Not for Lifting, Beaver Hot Dipped Galvanised Wire Rope Thimbles.