Bossweld X-Cut 15 Plasma Cutter 240V 15A

The Bossweld X-Cut 15 is a lightweight inverter plasma cutter that runs from a standard 240V supply through a fitted 15 A plug. It has a 40 An output and pilot arc start, and cuts up to 15mm. It ships with a 4 m PT40 torch, a 3 m earth clamp and a carry strap, so it is ready to cut once it is connected to an air supply. This listing is the Bossweld X-Cut 15 Plasma Cutter 240V 15A: start type Pilot arc, cutting capacity Up to 15mm, output current 40 A, input supply 240V.

IGBT inverter technology keeps the machine compact and the arc stable, which makes it easy to carry between jobs. A built-in air regulator and an air-check switch let you set up the air supply at the machine, and the machine has a central torch connector. It suits fabrication, automotive and general metalwork.

Where this product is used

• Fabrication and general metalwork cutting up to 15mm
• Automotive and panel work where a lightweight machine is easier to move
• Workshop and site cutting from a standard 240V outlet

Features

• 40 An output with pilot arc start
• Runs on 240V through a fitted 15 A plug
• Cuts up to 15mm
• IGBT inverter, lightweight and portable
• Built-in air regulator and air-check switch
• Supplied with 4 m PT40 torch, 3 m 200 An earth clamp and carry strap

Key specifications

Choosing the right option

Check that your 240V outlet is rated for the machine and that you have a clean, dry compressed air supply, as plasma cutting needs one. The operator manual gives the air pressure and flow. An inline filter such as the Bossweld Plasma Air Filter M26 helps keep moisture and oil out of the torch. If you need more than 15mm, you will need a higher output machine.

Matching and related parts: Bossweld PT40 Plasma Cutting Torch 4 m, Bossweld Plasma Wear Parts Kit PT40, Bossweld Plasma Air Filter M26, Bossweld X-Cut 15 Plasma Cutter With Bonus Consumable Pack.