Brady 58220 Aisle Marking Tape, 50 mm x 33 m, Blue

Brady aisle marking tape is a vinyl floor marking tape on a 33 m roll. Brady's Australian pages name it ToughStripe Vinyl Floor Marking Tape. This listing has 7 rolls: 50 mm wide in yellow, red, blue, green and white, and 75 mm wide in yellow and red (manufacturer-stated).

Brady describes the tape as having a pressure sensitive rubber based adhesive that sticks to virtually any clean, dry surface, with good chemical, oil and water resistance and quick application. Its Australian pages suggest it for marking aisles, passageways and storage locations and for identifying equipment and egress paths (manufacturer-stated).

Brady's US page adds a thickness of 0.14 mm (0.0055 in), a service temperature from -40 to 80 °C and a minimum application temperature of 10 °C, and lists the tape as non-reflective. It also carries a California Prop 65 cancer warning for DINP and lists no REACH SVHC (manufacturer-stated). Brady's Australian pages list no thickness, temperature or standard. Where Brady's page gives imperial sizes, the metric figure is converted and may differ slightly from other listings. The Product Code is Brady's ordering number for each roll (Brady prints no separate part number). Check that the product suits your surface, traffic and site conditions before you apply it.

Where this product is used

• Marking aisles, passageways and storage locations (manufacturer-stated).
• Identifying equipment and egress paths (manufacturer-stated).
• Colour-coded floor zones in warehouses and workshops.

Features

• Vinyl tape with a pressure sensitive rubber based adhesive (manufacturer-stated)
• Good chemical, oil and water resistance (manufacturer-stated)
• 33 m rolls in 50 and 75 mm widths (manufacturer-stated)
• Yellow, red, blue, green and white (manufacturer-stated)
• Thickness 0.14 mm, service temperature -40 to 80 °C (Brady US page) (manufacturer-stated)
• Quick application (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the width and colour from the table: 75 mm is available in yellow and red only. For a heavier polyester floor tape for B30 printers see the Brady ToughStripe B-514 floor marking tape, and for hazard warning tape see the Brady indoor warning tape. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: Brady ToughStripe floor marking tape for B30 printers, Brady ToughStripe B-514 floor marking tape, Brady indoor warning tape, Brady aisle marking machine and Brady standard barricade tape.