Brady B30C-1125-483BK-KT ToughStripe Floor Marking Tape, 28.58 mm x 30.48 m, Black

Brady ToughStripe is a printable floor marking tape on a continuous 30.48 m (100 ft) roll for Brady i3300, i4311, i5300, S3100 and S3700 printers. It is a printer supply, so you print your own legends, shapes and markings on it. This listing has 23 rolls in four widths (28.58, 57.15, 76.2 and 101.6 mm) and 7 colours: black, blue, green, orange, red, white and yellow. Each width comes in some colours only, so use the table to match a colour to a width (manufacturer-stated).

Brady says the tape is made of ToughBond ultra aggressive polyester (B-483) with a B-634 polyester overlaminate that is provided, designed for high adhesion to low surface energy floors and high traffic areas and to hold up against forklift traffic. It is thermal transfer printable, has a permanent rubber based adhesive and is 0.203 mm thick (manufacturer-stated). A ribbon is required and sold separately: Brady names B30-R4400-WT for black, blue, green and red rolls and B30-R6000 for orange, white and yellow rolls.

Brady's page for each roll gives conflicting temperature and outdoor use figures and Brady lists the tape as UL approved and CSA accepted without a standard or file number, so none of these is relied on here (manufacturer-stated). Ask us if an approval or an outdoor use matters for your job. The Product Code is Brady's part number for each roll and the Brady ordering number is shown beside it in the table below. Where Brady's page gives imperial sizes, the metric figure is converted and may differ slightly from other listings.

Where this product is used

• Printed floor marking, lean and 5S zones, and warehouse and safety identification (manufacturer-stated).
• Inventory and inspection labelling on floors and high traffic areas.

Features

• Polyester floor marking tape with an overlaminate provided (manufacturer-stated)
• Aggressive permanent rubber based adhesive for low surface energy floors and high traffic areas (manufacturer-stated)
• Thermal transfer printable on i3300, i4311, i5300, S3100 and S3700 printers (manufacturer-stated)
• Continuous 30.48 m rolls, 28.58 to 101.6 mm wide (manufacturer-stated)
• 7 colours
• Needs a B30-R4400-WT or B30-R6000 ribbon, sold separately (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the width for your printer and job, then the colour from the table. The legend colour comes from the ribbon you fit. For plain vinyl rolls that need no printer see the Brady aisle marking tape, and for the B-514 version see the Brady ToughStripe B-514 floor marking tape. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: Brady ToughStripe B-514 floor marking tape, Brady ToughStripe floor marking tape, Brady aisle marking tape, Brady indoor warning tape and Brady glow in the dark tape.