Brady B30C-1125-483GN-KT ToughStripe Printable Floor Marking

Brady ToughStripe is a printable floor marking tape on a continuous 30.48 m (100 ft) roll for Brady i3300, i4311, i5300, S3100 and S3700 printers. It is a printer supply, so you print your own legends, shapes and markings on it. The range has 23 rolls in four widths (28.58, 57.15, 76.2 and 101.6mm) and 7 colours: black, blue, green, orange, red, white and yellow. Each width comes in some colours only.

The tape is made of ToughBond ultra aggressive polyester (B-483) with a B-634 polyester overlaminate that is provided, designed for high adhesion to low surface energy floors and high traffic areas and to hold up against forklift traffic. It is thermal transfer printable, has a permanent rubber based adhesive and is 0.203mm thick. Conflicting temperature and outdoor use figures, and the tape as UL approved and CSA accepted without a standard or file number, so none of these is relied on here.

Where this product is used

• Printed floor marking, lean and 5S zones, and warehouse and safety identification
• Inventory and inspection labelling on floors and high traffic areas

Features

• Polyester floor marking tape with an overlaminate provided
• Aggressive permanent rubber based adhesive for low surface energy floors and high traffic areas
• Thermal transfer printable on i3300, i4311, i5300, S3100 and S3700 printers
• Continuous 30.48 m rolls, 28.58 to 101.6mm wide
• 7 colours
• Needs a B30-R4400-WT or B30-R6000 ribbon, sold separately

Key specifications

Choosing the right option

Choose the width for your printer and job, then the colour from the table. The legend colour comes from the ribbon you fit. For plain vinyl rolls that need no printer see the Brady aisle marking tape, and for the B-514 version see the Brady ToughStripe B-514 floor marking tape.

Related Brady products: Brady ToughStripe B-514 floor marking tape, Brady ToughStripe floor marking tape, Brady aisle marking tape, Brady indoor warning tape and Brady glow in the dark tape.