Brady M4-11-595 B-595 Vinyl Labels, Black on White, 19.05 x 12.7 mm, 360 per Cartridge

Brady B-595 die-cut labels come as pre-cut cartridges for Brady M4 and M5 series printers. Each cartridge holds a roll of white vinyl labels with permanent acrylic adhesive, printed black by thermal transfer. Five sizes are listed, from 12.7 x 12.7 mm to 38.1 x 25.4 mm, with 160 to 360 labels in each cartridge (manufacturer-stated). Brady lists the M4 sizes for the BMP41, BMP51, M410, M510 and M511 and the 38.1 x 25.4 mm M5-31-595 for the BMP51, M510 and M511 (manufacturer-stated).

B-595 is a vinyl with a permanent acrylic adhesive. It is 0.10 mm thick, works from -40 to 82 °C in service and can be applied at temperatures down to -18 °C (manufacturer-stated). Brady quotes an average outdoor durability of 8 to 10 years for the stock material and lists the abrasion, chemical, oil and water resistance of the label (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is the alphanumeric code printed on the cartridge, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses to identify the same product. Both are in the table below, and the Product Code shown for each option on this page is the printed code.

Where this product is used

• Component and equipment labelling, including electrical equipment (manufacturer-stated).
• Facility, pipe and valve identification, and warehouse and lean or 5S labelling (manufacturer-stated).
• Outdoor and harsh environment labels that need a permanent bond (manufacturer-stated).
• Asset and equipment tags in pre-cut sizes, with no trimming.

Features

• Vinyl label with permanent acrylic adhesive (manufacturer-stated)
• Service temperature -40 to 82 °C (manufacturer-stated)
• Average outdoor durability of 8 to 10 years (stock material) (manufacturer-stated)
• Abrasion, chemical, oil and water resistant (manufacturer-stated)
• Pre-cut sizes, so there is nothing to trim
• Five sizes, each with its printed product code

Common specifications

Key specifications

Selecting the right option

Choose the size by the space on the item: the 12.7 x 12.7 mm label suits small components and the 38.1 x 25.4 mm label gives room for several lines or a barcode. Sizes are listed width first, then height. Brady lists these products as supplied with ribbon (manufacturer-stated). For a coloured label or a longer run of text, the B-595 vinyl label tape cartridges is continuous, so you set the length. For a polyester label that handles solvents and heat, see the B-422 polyester labels and tape.

Related products

Other Brady M4/M5 label ranges: B-595 vinyl label tape cartridges, B-584 retro-reflective label tape, B-422 polyester labels and tape and M5-01-425-FT T-flag wire labels.