Brady M5-01-425-FT M5-01-425-FT B-425D T-Flag Polypropylene

The Brady M5-01-425-FT is a cartridge of 200 pre-cut T-flag labels for marking small-diameter wires and data cables from a Brady M5 series printer: the BMP51, BMP53, M510 and M511. Each label is a matte white polypropylene T-flag, 40mm high by 30mm wide, with a 20 x 30mm printable area, printed black by thermal transfer.

The material is B-425D, a 0.11mm matte polypropylene with a permanent acrylic adhesive. It works from -80 to 130 °C in service and resists chemicals and solvents. It is for indoor use and is not recommended for outdoor use. UL recognised to UL969, CSA accepted to C22.2 No. 0.15-95 and RoHS compliant to 2011/65/EU, with exemptions. The label is halogen-free. The Brady ordering number for the same product is 170860. These products are supplied with ribbon.

Where this product is used

• Wire and cable labelling, including small-diameter data cables
• Data and telecommunications labelling
• Asset tracking, barcode, inventory and inspection labelling
• Component and equipment labelling, and general identification, indoors

Features

• Pre-cut T-flag labels for small-diameter wires and data cables
• Matte polypropylene with permanent acrylic adhesive
• Service temperature -80 to 130 °C
• Chemical and solvent resistant
• UL969 recognised and CSA C22.2 No. 0.15-95, ribbon dependent
• Halogen-free
• RoHS compliant to 2011/65/EU, with exemptions
• 200 labels per cartridge

Key specifications

Choosing the right option

This is a flag label, so it suits cables and wires where the printed area should stand out from the cable. For labels that wrap or stick flat see the B-422 polyester labels and tape and the B-595 die-cut vinyl labels.

Related Brady products: B-595 die-cut vinyl labels, B-595 vinyl label tape cartridges, B-584 retro-reflective label tape and B-422 polyester labels and tape.